Skoda Bolero Owner's Manual page 48

›
Select the desired device.
›
Confirm the message concerning the connection in the device screen.
™
In the main menu the MirrorLink
Main menu - function keys and information
Disconnection and return to the main menu SmartLink

Displays a list of running applications with the ability to terminate them

Displays the screen contents of the connected device (while an application

is running)
™
Settings of the MirrorLink function

List of certified applications
A
Other pages with applications (by running your finger sideways across the
B
screen or by turning the dial, the next page can be displayed )
Return to the main menu of the MirrorLink
menu
›
To return to the main menu of the MirrorLink
menu Radio), press the button
Disconnection
›
Disconnect the device from the USB input.
or
›
In the main menu of the MirrorLink
The connection will be terminated and the main menu SmartLink is displayed
» Fig. 25 on page 40 - .
Operation
connection is shown » Fig. 29.
™
connection from another device
™
connection (e.g. from the
→ MirrorLink™.

™
connection press the function key  .
Fig. 30
Example of a running application
Start the application
›
In the main menu of the MirrorLink
tion.
The application starts and the following function keys are displayed
If there is only one available application it will be started automatically after
™
the MirrorLink connection is established.
- Operation of the MirrorLink
A
Return to the main menu of the MirrorLink

Keyboard display

Masking the function keys

Displays the function keys right / left / lower

- Using the connected device, as well as the running application
B
Depending on the type of the connected device, as well as the current running
application, various function keys of the connected device can be displayed (at
the most three at the same time).
Display hidden function keys
›
If the icon can be seen in the device screen when the function keys are mut-
ed  then press the controller  .
Display of the running application
›
In the list of applications, press the function key 
Ending the current application
›
Press the function key  →  .
›
Press the function key of the desired application with the symbol  .
By pressing the function key Close all, all running applications are closed.
™
connection select the desired applica-
™
connection
™
connection
» Fig. 29 on page 44 .
SmartLink
» Fig. 30.
45