Skoda Bolero Owner's Manual page 35

Note
The range of the connection to the hands-free system is limited to the pas-
■
senger compartment.
The maximum number of paired telephones is 20. Pairing a new telephone
■
after reaching the maximum number causes the telephone that has not been
paired for the longest time to be automatically replaced.
conditions for coupling
The telephone can be paired with the device under the following conditions.
The ignition is switched on.

®
The Bluetooth function of the device

switched on.
The visibility of the device » page 15

The telephone is within range of the Bluetooth

The telephone is compatible with the device.

There is no device connected to the device using Apple CarPlay.

The pairing can be initiated from the device or from the telephone.
During the coupling and connecting process the device can demand the confir-
®
mation by the Bluetooth profile (e.g., enable contact import, enable the test
messaging or the connection of an audio player or similar). The telephone dis-
play should be monitored to acknowledge any possible request.
Please refer to the compatibility of telephones as well as updates which are
®
available for the Bluetooth device, and are available on the ŠKODA Internet
pages.
http://infotainment.skoda-auto.com
Telephone search
The telephone is not in the list of paired devices
The telephone can be searched for in one of the following ways.
›
If there is no connected telephone to the device, then press the button
→ Find telephone.
›
If there is no telephone connected to the device, then press the button
→  → Find telephone.
A search for available devices starts. After about 30 seconds a list of found de-
vices appears, which is updated up to 1 minute after the start of the search ap-
pears.
32
Connectivity
» page 15 and the telephone is
and the telephone is switched on.
®
signal of the device.
›
If you do not want to wait for the display of the list press the function key
Results.
›
Select the desired telephone.
The telephone is in the list of paired devices
If a telephone is connected with the device then proceed in one of the follow-
ing ways.
›
Press the button

or
›
Press the button

phone.
or
›
Press the button

telephone and a Bluetooth
Coupling - no telephone connected
›
Press the button

A search for available Bluetooth
›
Select the desired telephone.
›
Confirm the pairing.
After pairing confirmation the telephone is connected to the device as the
main telephone.
Coupling - connected telephone
›
Press the button

A search for available Bluetooth
›
Select the desired telephone.
The following menu appears in the screen.
 Cancel - Cancel the pairing
■
■ Replace - Coupling and replacement of the main telephone
 Add - Coupling as an additional telephone
■
›
Select the desired connection type.
›
Confirm the pairing.
After pairing confirmation the telephone connects to the device.
→  and select the desired phone.
→  Select telephone and select the desired tele-
→  → Bluetooth → Paired devices and select the
®
- connection profile » page
→ Find telephone.
®
devices takes place.
→  → Find telephone.
®
devices takes place.
34.