Programming Procedure; Hardware Requirements - LG-Nortel SINGLE LINE TELEPHONE LKA-200 Product Specification

_________________________________________________________________________________________________
Ringer melody and volume control -
be adjusted by user. There are three different melodies with high, medium,
low and off sound level. See section 5.0 for programming procedure.

4.0 HARDWARE REQUIREMENTS

Each telephone model is comprised of the following major components:
- Baseset
- Handset
- Handset cord
- Line cord
- User manual

5.0 PROGRAMMING PROCEDURE

Follows these instructions to program the ringer melody and sound volume:
1. Lift the handset.
2. Press P/M button then you can hear beep sound at handset, during this
stage your telephone will be automatically muted.
3. Then press '#' button follow by the single number digits to program Ringer
melody and sound volume as the follows:
'1' Melody 1, Volume Low
'2' Melody 1, Volume Medium
'3' Melody 1, Volume High
'4' Melody 2, Volume Low
'5' Melody 2, Volume Medium
'6' Melody 2, Volume High (default)
'7' Melody 3, Volume Low
'8' Melody 3, Volume Medium
'9' Melody 3, Volume High
'0' Ring sound off
Remark: If digit '0' is programmed, the tone ringer will be turned off until next
off-hook where it will automatically return back the last setting before 0.
_____________________________________________________________________________
The Ringer Melody and volume can
3
Issue 1 Jan 2006
LKA-200