OWL Intuition RBT-3C Installation Instructions Manual page 4

Installation Instructions
Single or multiple heating zones
If this is a single zone heating system then simply follow these instructions. The OWL Intu-
ition system will support up to 4 heating zones. For additional Room Sensors simply repeat
these instructions for each one required. The web dashboard will automatically update the
Heating widget with the additional device when you next log in.
Network OWL installed and online
The Network OWL should already be installed. Refer to the Network OWL Getting Started
Guide for guidance if required. Check that it is powered-up and connected to the OWL
servers (the top green LED should be flashing in a "triple blip pattern").
IMPORTANT: Please upgrade the Network OWL firmware
1. It is essential that the Network OWL is running the latest released version of firmware
available (at least Version 2.2). Please log in to the OWL Intuition web dashboard at
https://www.owlintuition.com (this is a secure connection).
2. Click on the Devices menu. The Network OWL will appear in the list of devices. Click
on Network OWL image to open a new window. If an upgrade is required, an Update
Device button will be visible. Click on this button then wait for approximately 5 min-
utes for the upgrade to complete. You should check that the upgrade was successful
before proceeding by repeating this instruction.
4 © 2 Save Energy Limited 2013