Step 2: Charging The Battery Pack - Sony HDR-SR10 Handycam Operating Manual

Step 2: Charging the battery pack
4
Battery pack
DC IN jack - - - '
DC plug
i/CHG
(charge) lamp
POWER switch
16
You can charge the "lnfoLiTHIUM"
battery pack (H series) (p. 101) after
attaching it to your camcorder.
" Notes
• You cannot attach any "InfoLITHIUM" battery
pack other than the H series to your camcorder.
1
Connect the AC Adaptor to the
DC IN jack on the Handycam
Station.
Be sure that the" mark on the DC plug
is facing up.
2
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
3
Turn the POWER switch in the
direction of the arrow to OFF
(CHG) (the default setting).
4
Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
5
Insert the camcorder into the
Handycam Station securely, all
the way to the bottom.
The
i
/CHG (charge) lamp lights up and
charging starts. When the
i
/CHG
(charge) lamp turns off, the battery is
fully charged.
" Notes
• When inserting the camcorder into the
Handycam Station, close the DC IN jack cover.