Removing The Adapter; Figure 2-6 Unplugging Media Coupler - KTI KF-C16 Installation Manual

2.2 Removing the Adapter

To remove the adapter from the slot, follow these steps:
1. Disconnect the Media Coupler from the Adapter
Unplug the media coupler from the adapter before ejecting the
adapter from the PC Card slot. To remove the media coupler
plug from the adapter, it is necessary to unlatch the hooks and be
depressing the two small latch wings of the plug. Use thumb and
forefinger to squeeze the latch wings into the plug body and
gently pull the plug out of its receptacle.

Figure 2-6 Unplugging Media Coupler

2. Eject the Adapter from the Computer
Firmly press the computer's PC Card eject button to disengage
the adapter from the slot connector. The adapter will then
protrude from the slot. Grip its protruding end between your
fingers and withdraw it from the slot.
8