Figure 2-4 Connecting To A Hub - KTI KF-C16 Installation Manual

3. Connect to the Network Medium
Make the network connection by running a UTP cable from the
connected hub to your media coupler. Plug one end (RJ-45 con-
nector) of the cable into an available hub port and plug the other
end (RJ-45 connector) to the RJ-45 jack of the media coupler.
The UTP cables used for different connected hubs are:
100BASE-TX Hub 2-pair straight-through Cat. 5 UTP cable
10BASE-T Hub

Figure 2-4 Connecting to a Hub

2-pair straight-through Cat. 3, 4 or 5 UTP cable
6