PLEASE READ THESE INSTRUCTIONS CAREFULLY
It is important that your stove is correctly installed, as San Remo Stoves cannot accept
responsibility for any fault arising through incorrect installation.
1. Your San Remo Stove comes
packed in a plywood crate.
Carefully remove the steel straps
and lift off the upper crate.
3. Remove the stove from the pallet and carefully tip it onto it's back
4. Sort out the legs and fixings
Assembly Instructions
2. Remove the plastic bag and
upon opening the door remove all
the contents
5. Ensure the tapped holes, on the
base, are free from obstruction. Use
a sharp screwdriver to remove any
fire cement.
HD01 18/12/11