Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
1x4 HDMI Extender / Splitter
Single CAT5 with 3D Support and
Local Output
© 2012 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.
www.avenview.com|1
Advertisement
Table of Contents
Related Manuals for Avenview HDM3D-C5SP-4
Summary of Contents for Avenview HDM3D-C5SP-4
-
Page 1: Local Output
No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. -
Page 2: Table Of Contents
Panel Description ........................6 1.7.1 Front Panel ..........................6 1.7.2 Rear Panel ..........................6 1.7.3 Bottom Panel ......................... 6 EDID Learning ......................... 7 Installation ..........................7 Section 2: Specifications ......................... 8 HDMI PIN Definition....................... 9 CAT5/6 PIN Definition ......................9 www.avenview.com|2... -
Page 3: Section 1: Getting Started
Removal, installation, and set-up service charges. Safety Instructions The Avenview HDM3D-C5SP-4 HDMI 1.3 Extender / Splitter over CAT5 with Full 3D Support has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the HDM3D-C5SP-4 should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. -
Page 4: Regulatory Notices Federal Communications Commission (Fcc)
Introduction The Avenview HDM3D-C5SP-4 HDMI over Single CAT5 with Full 3D Support Distribution Amplifier with Local Output provides the most flexible solution by which the high definition video and high quality audio can be transmitted to different locations over a long distance. These devices can cascade, allowing you to extend HDMI compliant displays almost anywhere. -
Page 5: Package Contents
Package Contents Before you start the installation of the Extender/Splitter, please check the package contents. HDM3D-C5SP-4 Power Adapter (+5VDC, 4A) User’s Manual Before Installation Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. -
Page 6: Panel Description
2. Signal LED 3. Power Jack 4. HDMI Input 5. HDMI Local Output 6. CAT 5/6/7 Output 1 – 4 7. SW1: EDID Mode 8. SW2: EDID – Full HD Selection 9. SW3: EDID – Audio Selection 10. SW4: 3D/2D Selection www.avenview.com|6... -
Page 7: Edid Learning
EDID Learning 1. Power up the HDM3D-C5SP-4. Connect to HDMI OUTPUT with the display you want the HDM3D-C5SP-4 to learn its EDID. 2. To learn the display's EDID for source device connected to HDMI OUTPUT, Set SW1 to left Position. Power on and wait for about 2-3 seconds to complete the EDID learning process;... -
Page 8: Section 2: Specifications
Section 2: Specifications Item Description Units HDM3D-C5SP-4 Unit Description HDMI 1.3 Transmitter / Splitter over CAT5 / CAT6 with Full 3D Support HDMI Compliance HDMI Deep Colour & Full 3D HDCP Compliance Video Bandwidth Single Link 225 MHz (6.75Gbps) Supported Resolutions... -
Page 9: Hdmi Pin Definition
Pin 6 Pin 16 TMDS Data1– Pin 7 Pin 17 TMDS Data0+ DDC/CEC Ground Pin 8 Pin 18 TMDS Data0 Shield +5V Power Pin 9 Pin 19 TMDS Data0– Hot Plug Detect Pin 10 TMDS Clock+ CAT5/6 PIN Definition www.avenview.com|9... - Page 10 Type of category cable Wiring Shielding CAT5 CAT5e CAT6 Unshielded (UTP) Solid Shielded (STP) Unshielded (UTP) Stranded Shielded (STP) Termination Please use EIA/TIA-568-B termination (T568B) at any time www.avenview.com|10...
- Page 11 Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of...
Need help?
Do you have a question about the HDM3D-C5SP-4 and is the answer not in the manual?
Questions and answers