The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.
1x8 hdmi 1.3 extender / splitter over single cat5 with 3d support and local output (11 pages)
Summary of Contents for Avenview HDM-SHAREPRO-IP
Page 1
No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims...
Page 2
Product Application & Market Sectors Corporate House Of Worship Military Residential Education Industrial Medical Aviation www.avenview.com...
1.8 INSTAllATION A ..........................6 1.9 INSTAllATION B ..........................7 1.10 INSTAllATION Of DRIvER AND CONTROl SOfTWARE ............8 1.11 CONTROl SOfTWARE ........................9 1.12 DISCONNECT SOfTWARE ......................11 GENERAl TROuBlESHOOTING ....................12 SpECIfICATIONS ..........................13 SpECIfICATIONS ..........................13 pIN & WIRING STANDARD DEfINITION ..................14 www.avenview.com Page 3...
• Removal, installation, and set-up service charges. SAfETy INSTRuCTIONS The Avenview HDM-SHAREpRO-Ip , RJ45 to HDMI Converter has been tested for conformity to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the HDM-SHAREpRO-Ip should be used with care.
DO NOT TAMpER WITH THE uNIT. DOING SO WIll vOID THE WARRANTy AND CONTINuED uSE Of THE pRODuCT. THE vIDEO BOARDS ARE vERy SENSITIvE TO STATIC. plEASE ENSuRE If RACk MOuNTED OR INSTAllED ON A SuRfACE, IT SHOulD BE IN A GROuNDED ENvIROMENT. www.avenview.com Page 2...
INTRODuCTION HDM-SHAREpRO-Ip is an ideal networking display solution; it allows multiple users on the same Ethernet network to access the display without physically connect their computer directly to the display! The product supports ONly ONE connection at a time. users can now enjoy their favorite multimedia content stored on their computer from anywhere in their home or office.
CONTENTS Before you start the installation of HDM-SHAREpRO-Ip , please check the STANDARD package contents. HDM-SHAREpRO-Ip pOWER ADApTER (5vDC) uSER’S MANuAl INSTAllATION DISC BEfORE INSTAllATION • put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
Device ID: To identify multiple units in cascademode Note: preferred CAT6 and Gigabit 10/1000 Router to ensure HD1080p resolution without delay in transmission Important Before starting the insulation please ensure that all devices are powered OFF www.avenview.com Page 5...
1. Connect Converter to Cpu with RJ45 cable; follow the standards of TIA-568BlAN 2. Connect your HDMI OR vGA display (such as a lCD Tv/plASMA) to the HDMI OR vGA port on the HDM-SHAREpRO-Ip . 3. Make sure CAT-5E/6 lAN cable is tightly connected and not loose.
1. Connect HDM-SHAREpRO-Ip to Wireless or Wired Router with RJ45 cable at the desired Monitor; follow the standards of TIA-568BlAN 2. Connect your HDMI OR vGA display (such as a lCD Tv/plASMA) to the HDMI OR vGA port on the HDM-SHAREpRO-Ip . 3. Make sure CAT-5E/6 lAN cable is tightly connected and not loose.
Select your preferred language. From Disk run the Software.exe file Accept and wait for install to be completed automatically When completed restart the computer. You will experience brief periods of dark screens and /or resolution changes during this time. www.avenview.com Page 9...
CONTROl SOfTWARE Step 1. Double-click ICON USB Server file: On first use, click search and then the software will search the HDM-SHAREpRO-Ip automatically. System will display video converter searched out Click : (The preferred device to be connected-DISPLAY or MEDIA DEVICE) Click B: (connect the device), the converter will be automatically connected.
Page 14
Computer only, Duplicate, Extend and projector only. you can easily switch display mode. From left to right, Computer only, Duplicate, Extend and projector only. You can easily switch display mode. Short-cut function cannot be applied by some computers due to compatibility www.avenview.com Page 11...
DISCONNECT SOfTWARE A. Select the device B. Click the button to disconnect the chose device. If the software refuses to disconnect, please power off the converter. Make sure to store all files before power off. www.avenview.com Page 12...
• power off the converter or re-boot the computer. AND ExIT?” WHEN USB SERVER IS CLOSED. CONNECT VGA AND HDMI A: please select vGA or HDMI output before the converter is OUTPUT SIMULTANEOUSLY, BUT powered on. VGA NO DISPLAY www.avenview.com Page 13...
Page 17
SpECIfICATIONS ITEM DESCRIPTION UNITS HDM-SHAREpRO-Ip UNIT DESCRIPTION RJ45 TO HDMI CONvERTER HDMI COMPLIANCE full HD HDCP COMPLIANCE 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, SUPPORTED RESOLUTIONS 1080i@50/60Hz, 1080p@50/60Hz AUDIO SUPPORT Stereo Audio PRINTER SUPPORT Multi-function print (Mfp) over a network from any networked computer;...
Page 19
PARTS: During the Warranty Period of of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Parts applicable to product(s) after Warranty Period. For part(s) costs, please contact support@avenview.com.
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Need help?
Do you have a question about the HDM-SHAREPRO-IP and is the answer not in the manual?
Questions and answers