The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.
1x8 hdmi 1.3 extender / splitter over single cat5 with 3d support and local output (11 pages)
Summary of Contents for Avenview HDM-C6IP-SET
Page 1
No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims...
Page 2
Product Application & Market Sectors Corporate House Of Worship Military Residential Education Industrial Medical Aviation www.avenview.com...
• Removal, installation, and set-up service charges. SAfETy INSTRuCTIONS The Avenview HDM-C6Ip-SET, HDMI Extender has been tested for conformity to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the HDM-C6Ip-SET should be used with care.
DO NOT TAMpER WITH THE uNIT. DOING SO WIll vOID THE WARRANTy AND CONTINuED uSE Of THE pRODuCT. THE vIDEO BOARDS ARE vERy SENSITIvE TO STATIC. plEASE ENSuRE If RACK MOuNTED OR INSTAllED ON A SuRfACE, IT SHOulD BE IN A GROuNDED ENvIROMENT. www.avenview.com Page 2...
INTRODuCTION HDM-C6Ip-SET, HDMI extender set is designed to extend your HD display with the resolutions of 1080p/60Hz up to 330 feet (100 meters) away from your HDMI or DvI-D source. Thanks to the use of the TCp/Ip protocol, you can transfer your high- definition video over an existing TCp/Ip network.
CONTENTS Before you start the installation of HDM-C6Ip-SET, please check the A. STANDARD package contents. HDMI TRANSMITTER HDMI RECEIvER pOWER ADApTER (5vDC) uSER’S MANuAl BEfORE INSTAllATION • put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
HDMI male-male cable. • Each Transmitter and Receiver after pairing support only point to point operation. It cannot support signals broadcasting by HDMI. • Important Before starting the insulation please ensure that all devices are powered OFF www.avenview.com Page 7...
INSTAllATION please ensure all the package contents are all received. To setup Avenview HDM-C6Ip-SET follow these steps for connecting to a device: 1. Connect your HDMI source (such as a Blu-ray Disc player) to Transmitter (HDM-C6Ip-S). 2. Connect your HDMI display (such as a lCD Tv) to the receiving unit HDM-C6Ip-R.
Page 15
PARTS: During the Warranty Period of of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Parts applicable to product(s) after Warranty Period. For part(s) costs, please contact support@avenview.com.
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Need help?
Do you have a question about the HDM-C6IP-SET and is the answer not in the manual?
Questions and answers