Table of Contents
Advertisement
Quick Links
1X8 HDMI 1.3 Extender / Splitter over
Single CAT5 with 3D Support and
Local Output
Model #: HDM3D-C5SP-8
© 2012 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.
www.avenview.com
1
Advertisement
Table of Contents
Related Manuals for Avenview HDM3D-C5SP-8
Summary of Contents for Avenview HDM3D-C5SP-8
- Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
-
Page 2: Table Of Contents
Package Contents ........................4 Before Installation........................5 Panel Description ........................6 1.7.1 Front Panel ..........................6 1.7.2 Rear Panel ..........................6 EDID Learning ......................... 7 Installation ..........................7 Section 2: Specifications ......................... 8 HDMI Pin Definition ....................... 9 CAT5/6 Pin Definition......................9 www.avenview.com... -
Page 3: Section 1: Getting Started
Removal, installation, and set-up service charges. Safety Instructions The Avenview HDM3D-C5SP-8 HDMI 1.3 Extender / Splitter over CAT5 with Full 3D Support and Local Output has been tested for conformance to safety regulations and requirements, and has been certified for international use. -
Page 4: Regulatory Notices Federal Communications Commission (Fcc)
Introduction The Avenview HDM3D-C5SP-8 HDMI 1.3 over Single CAT5 Splitter Extender with 3D Support and Local Output provides the most flexible solution by which the high definition video and high quality audio can be transmitted to different locations over a long distance. These devices can cascade, allowing you to extend HDMI compliant displays almost anywhere. -
Page 5: Before Installation
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. Do not twist or pull by force ends of the optical cable. It can cause malfunction. www.avenview.com... -
Page 6: Panel Description
5 = [Video] –2D / HD 24bit (1080p@30)(1080i@60)(720p@60) [Audio] – up to 2.0ch surround sound 6 = [Video] –3D / Full-HD 36bit (1080p@60) [Audio] – up to 2.0ch surround sound 7 = [EDID Learning Mode] – learns EDID from the display www.avenview.com... -
Page 7: Edid Learning
EDID Learning 1. Power on the HDM3D-C5SP-8. Connect to HDMI OUTPUT with a HDMI Cable to the display you want the HDM3D-C5SP-8 to learn its EDID. 2. To learn the display's EDID from the source device, connect to HDMI OUTPUT. Set the mode to position”7”. -
Page 8: Section 2: Specifications
Section 2: Specifications Item Description Units HDM3D-C5SP-8 Unit Description 1 X8 HDMI Transmitter / Splitter over CAT5 / CAT6 with Full 3D Support HDMI Compliance HDMI Deep Colour & Full 3D HDCP Compliance Video Bandwidth Single Link 225 MHz (6.75Gbps) -
Page 9: Hdmi Pin Definition
Pin 6 Pin 16 TMDS Data1– Pin 7 Pin 17 TMDS Data0+ DDC/CEC Ground Pin 8 Pin 18 TMDS Data0 Shield +5V Power Pin 9 Pin 19 TMDS Data0– Hot Plug Detect Pin 10 TMDS Clock+ CAT5/6 Pin Definition www.avenview.com... - Page 10 Type of category cable Wiring Shielding CAT5 CAT5e CAT6 Unshielded (UTP) Solid Shielded (STP) Unshielded (UTP) Stranded Shielded (STP) Termination Please use EIA/TIA-568-B termination (T568B) at any time www.avenview.com...
- Page 11 Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of...
Need help?
Do you have a question about the HDM3D-C5SP-8 and is the answer not in the manual?
Questions and answers