Table of Contents
Advertisement
Move the
Refrigerator
Before
Installation
Push the refrigerator sideways through the
entrance door as shown in the right picture,
Door replacement
After the refrigerator is moved to the installation area, install the doors in the reverse
order in which they were removed.
Feed water tube installation
• Automatic
icemaker operation needs water pressure of 21.3-1 21 psi is too
much(Ib/inch2)(That a 7 ounce paper cup will fill within 3 sec.).
• If the water pressure does not reach 21.3psi(Ib/inch2),it is necessary to purchase a
separate pressure pump for the cool water feed.
• Keep the total length of the water feed tube less than 40 feet and be careful not to
bend or kink the tube. If the tube is longer than 40 feet, the icemaker and water
dispenser will not operate properly.
• Install the water reed tube away from any heat sources.
Warning
• Connect to potable water supply only.
• Refer to instructions with water filter kit for installation.
Advertisement
Table of Contents
