Table of Contents
Advertisement
5.2.3.2 Channel Select
Click [Main Menu Search Record search]
to enter into the interface shown as Picture
to enter into the interface shown as Picture
5-18
Picture 5-18
5.2.3.3 Time Axis setup, file clip and zoom in/out
Time Axis setup, file clip and zoom in/out
1) The DVR supports the processing control bar function when playing back record files shown as
supports the processing control bar function when playing back record files shown as
supports the processing control bar function when playing back record files shown as
Picture5-19A (Up to 4 CH is available).
19A (Up to 4 CH is available).
2) Click [
] icon beside
Time Axis: defaulted to 24hours, and allow user select 2hours, 1hour, 30minutes or
Time Axis: defaulted to 24hours, and allow user select 2hours, 1hour, 30minutes or
Time Axis: defaulted to 24hours, and allow user select 2hours, 1hour, 30minutes or
user-defined.
Detailed operation is as follows:
Detailed operation is as follows:
Detailed operation is as follows:
Detailed operation is as follows:
Detailed operation is as follows:
Detailed operation is as follows:
Detailed operation is as follows:
Detailed operation is as follows:
（ （ （ （ 1） ） ） ） Fixed time axit: If you select [
Fixed time axit: If you select [
Fixed time axit: If you select [
video content.
（ （ （ （ 2） ） ） ） User-defined: select [
and/or end time (that is to say
Now, the whole time axis equals the time quantum you just selected (shown as Picture 2-19-A-2.
Now, the whole time axis equals the time quantum you just selected (shown as Picture 2
Now, the whole time axis equals the time quantum you just selected (shown as Picture 2
Record search]
the processing bar to pop up the interface shown as Picture 5-19A-1.
the processing bar to pop up the interface shown as Picture 5
Picture 5-19A
Picture 5
elect [
elect [
]option and move the cursor to processing bar to select start time
]option and move the cursor to processing bar to select start time
]option and move the cursor to processing bar to select start time
that is to say, click any points of the processing bar as start time and/or end time
click any points of the processing bar as start time and/or end time),
Picture 5-19A
19A-2
Then tick-select the channel you want to playback;
select the channel you want to playback;
and click [Play] button to enter into the playback
and click [Play] button to enter into the playback
mode shown as Picture 5-19
mode shown as Picture 5
Picture 5-19A-1
] option, that means the processing control bar cover two-hours
] option, that means the processing control bar cover two
] option, that means the processing control bar cover two
12
Picture 5
Picture 5-19
1
Picture 5-19B
19B
User Manual
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the QV-3034 and is the answer not in the manual?