Height Adjustment
Level the door by inserting a flat ( - type) driver into the groove of the left height adjusting
screw and rotating it clockwise .
Level the door by inserting a flat ( - type) driver into the groove of the right height
adjusting screw and rotating it clockwise .
The refrigerator doors will close smoothly after adjusting the height adjusting screw
properly. If the doors do not close correctly, performance may be affected.
1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.
2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their
proper places. They are packed together to prevent possible damage during shipping.
3. Connect the power supply cord (or plug) to the outlet. Use this appliance on a
single-outlet circuit.
Installation