Network Setting - Dynamix E210 User Manual

Disable sip account

Network Setting

If you want to ...
network setting --1) Select "System setting" > "Advanced setting";
--2) Enter the password required（The default is empty);
--3) Select "Network", you can configure the following parameters:
____________________________________________________________________________________________
-SIP2: the secondary SIP , When the primary server is
unavailable ,use the SIP server
-Refresh time: Registration refresh interval, the minimum value is
20 The default value is 3600.
--5) Set up the above parameters, select "Submit changes" to saves
settings, Complete the account creation.
* Note: the parameters with the * mark must be set.
--1) Select "System setting" > "Advanced setting";
--2) Enter the password required（The default is empty);
--3) Select "SIP" > "Account sip";
--4) Select "Enable account" > "Disable";
--5) Select "Submit changes" to saves settings.
-Type: static IP or DHCP
-IP: enter IP address , Note: Do not duplicate the IP address with
other devices on the network
-Mask: enter appropriate sub mask
-GW: enter appropriate gateway
- DNS1: enter IP address of the primary DNS server
- DNS2: enter IP address of the secondary DNS server
-Web port: the default Web port is 80, if you change it (for example
change it to 88),you must use IP and Web port to login the web page (for
example http://192.168.0.200:88).It will take effect on next reboot.
13
Dynamix E210 IP Phone
Then...
www.godynamix.com