DESOTO / WORKER ASSEMBLY INSTRUCTION binding is usually the result of a sprocket Remove all parts from the frame and wheel cartons. misalignment. Repositioning the sprocket on the Check air pressure and inflate tires to 35 psi. Make rear axle, or re-squaring the trike rear to the front sure tires are properly seated on rims.
DESOTO /WORKER Assembly Instructions 7. Handlebar Slide the handlebar (41) through the clamp on the stem (43) with the portion containing the long bolt to the rear of handlebar. Install clear reflector. Install the stem into the fork (39) until the line marked on the stem is not visible.
6. Seat – Adjust seat for rider comfort and safety. 7. Tires – Keep tires inflated to the recommended tire pressure, as indicated on the tire’s sidewall. 8. Chain guard – Replace damaged or missing chain guard immediately. 9. Frame – Replace damaged frame immediately. Trailmate Owner’s Guide...
Page 8
Tel:(941) 755-5511 Fax: (941) 758-5141 Things to know before riding your cycle: Visit us @www.trailmate.com 1. Know your local bicycle laws and wear a helmet. 2. Do not exceed the recommended weight limit of 400 lbs. 3. No more than one rider at one time.
Need help?
Do you have a question about the Worker and is the answer not in the manual?
Questions and answers