Cleaning - Andrew James Soup Maker & Blender User Manual

Table of Contents

Advertisement

Push the On/Off button, you will hear a beep sound and all the lights on
the command panel blink.
Select the reheat function, the appliance will beep twice indicating that
the function is selected
The cooking and the mixing starts straight away, the working time is pre-
programmed for 10 minutes. The appliance will operate various steps of mixing and
cooking.
Your blender will stop automatically after the food is warmed up, you can also stop
it anytime by pressing the reheat button.

Cleaning

The jug can be washed using the soup chunky and coarse function buttons, it will
clean and will rinse itself quickly.
Empty the jug and put some warm water with dishwashing liquid into the
jug.
Use the function for a few minutes. For stubborn stains please use the pulse
function.
Empty the water and rinse it carefully before next using the blender.
Notice: If the food is stuck
to the minimum mark. Select the appliances Soup Chunky or Coarse soup function.
The combined action of heat and lemon juice will help remove the residue. If
necessary repeat again.
Other elements of the appliance
It is easier to proceed to the washing straight after using the appliance. As it
will be much easier to clean the appliance.
Always unplug your appliance before washing.
The inside of the jug, as well as every accessory can be washed with mild
soapy water with the supplied brush and sponge.
Do not use abrasive sponges or chloride products (bleach).
Do not immerse the motor unit, the jug and grinder base under water/
The warm up function's light will flash.
.
add the juice of 2 lemons into the jar then add water up
.
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents