Electrical Connections - AEG MCD2665E User Manual

CONNECTING THE APPLIANCE TO
THE POWER SUPPLY
• The electrical outlet should be readily
accessible so that the unit can be
unplugged easily in an emergency. Or it
should be possible to isolate the oven
from the supply by incorporating a
switch in the fixed wiring in accordance
with the wiring rules.
• The socket should not be positioned
behind the cupboard.
• The best position is above the cupboard,
see (A).
• Connect the appliance to a single phase
220 V/60 Hz alternating current via a
correctly installed earth socket. The socket
must be fused with a 16 A fuse.
• The power supply cord may only be
replaced by an electrician.
• Before installing, tie a piece of string to the
power supply cord to facilitate connection to
point (A) when the appliance is being installed.
• When inserting the appliance into the high-
sided cupboard, DO NOT crush the power
supply cord.
• Do not immerse the power supply cord or
plug in water or any other liquid.
(A)

ELECTRICAL CONNECTIONS

WARNING!
THIS APPLIANCE MUST BE
EARTHED
The manufacturer declines any
liability should this safety measure
not be observed.
If the plug that is fitted to your appliance is not
suitable for your socket outlet, you must call your
local AEG service agent.
www.aeg.com 33