Setup - Basics; Setting/Changing The Time And Date; Daylight Saving Time (Applicable In Certain States/Countries Only) - Animas IR 1200 User Manual

5
Setup – Basics

Setting/Changing the Time and Date

When you change your battery, the Verify screen allows you to edit the time and date.
You can also access the Time/Date screen by selecting Setup from the main menu.
1. From the Wake up screen, press OK/Enter to select Menu. Scroll to Setup on the Main
Menu. Press OK/Enter.
2. Scroll to Time/Date on the Setup Menu. Press OK/Enter.
3. Press the OK/Enter button to activate Edit Mode (indicated by flashing cursor).
4. Use the Up/Down arrows to change to your desired settings. Press the OK/Enter button to
confirm your setting and exit edit mode.
5. Use the Up/Down arrows to select the next field. Repeat the above process. Scroll to
highlight Main Menu and press OK/Enter button when finished. The Main Menu screen will be
displayed.
If you select the 12 hour time format, the AM/PM indicators will change as you scroll to set the
time. Be sure the desired AM or PM selection is correctly displayed when setting the time.

Daylight Saving Time (applicable in certain states/countries only)

"Spring Forward"
If you advance the hour on your pump clock after 11pm but before midnight, you must also
manually forward the date by one day. If you change your pump clock after midnight, your
pump date will have changed automatically to the appropriate date.
"Fall Back"
It is recommended that you set your clock back before midnight on Saturday or after 1am on
Sunday. This keeps your pump set to the correct date. Your pump will register an additional
hour in the Daily Totals History because the day has essentially been altered to consist of 25
hours. If you change the clock between midnight and 1am, you must also change the date. This
will result in a duplicate date entry in your history. (This duplicate entry will contain up to one
hour's worth of insulin delivered.)
Page 25