Rhaon System Block Diagrams - Rhaon iConyx CL-FR User Manual

ICL-FR
Users Manual
APPENDIX II: RHAON Block Diagrams
CobraNet
The drawing below shows the signal paths for a RHAON system using CobraNet digital audio distribution.
Except for the analog audio input line to the CobraNet Converter, all audio signal runs are standard CAT5 cables. The network is a stan-
dard Ethernet star topology. CobraNet does not permit looping or "daisy chaining" from amplifier to amplifier. The maximum CAT5 cable
length between devices is 100 Meters (approximately 325 feet).
Wiring diagram for a system using CobraNet for multi-channel digital audio distribution, loudspeaker control and monitoring.
Notes
1. Satisfactory Ethernet switches of many sizes (output ports) are widely available from many sources. Managed switches are recom-
mended over unmanaged switches; 100 BaseT minimum, Gigabit (1000 BaseT) recommended.
2. The number of loudspeakers is determined by the number of output ports provided by the switches. The computer(s) can be connected
to any Port on the Ethernet network.
3. Systems with CobraNet digital audio distribution require either a suitable Analog to CobraNet converter or a mixing console with a Co-
braNet output. Suitable analog to CobraNet converters are available from a number of sources, such as Bi-Amp, Peavey and others.
4. The RHAON network can easily be made redundant by connecting a duplicate of this network to the Secondary Ethernet Inputs on each
loudspeaker. Additional switches, analog-to-CobraNet converters, etc. would be required.
49