Supervise Mode - Rhaon iConyx CL-FR User Manual

ICL-FR
Users Manual
RHAON's Supervise mode is the one you will use most while your system is in operation (i.e., making sound). It is designed to empower
system operators with a comprehensive set of monitoring and loudspeaker/amplifier management tools. In Supervise mode, you can
quickly detect a problem anywhere in the system and (if you have access to the appropriate Control mode functions) take corrective action.
To switch from Control Mode to Supervise Mode, click on the Supervise tab in either the main workspace, or in a Group or Loudspeaker
Properties window.
The main Supervise screen is similar to the Connect screen. It shows your system layout in icon form. The Status field at the bottom of
each icon allows you to monitor all Loudspeakers or Groups at a glance. This field will change color and display a text message that indi-
cates the status of the loudspeaker. If there is a problem with any loudspeaker in a Group, that Group's icon will change color and display a
text alert.
In Supervise Mode, each Status Indicator will display one of the following colors and messages
COLOR
GREEN
YELLOW
RED
RED
RED
RED
RED
RED
If a Group icon displays an alert (yellow or red bar with text), double-click it to Expand it and show all of its Loudspeaker icons. One of
more of these icons will display the same alert: double-click it to open the loudspeaker's Properties window in Supervise mode.
40
MESSAGE STATUS
OK This loudspeaker is (or all loudspeakers in this Group are) connected
and operating
Overload Amplifier is being over driven
Unassigned Virtual loudspeaker has not been assigned to a physical loudspeaker
Offline Loudspeaker has lost power or been disconnected from the network
Driver Open One of the loudspeaker's drivers has failed
Hot An amplifier's over temperature circuitry is engaged
Limiting An amplifier is being over driven or malfunctioning
Amp Fail An amplifier has failed