Rhaon iConyx CL-FR User Manual page 38

ICL-FR
Users Manual
Group Control (continued)
Double clicking on the Group icon will open the
Connect Properties folder. Notice that the Group
Connect window shown here is very similar to the
one for individual loudspeakers except for the lack
of level meters and CobraNet channel selection
facilities.
In the dark grey area on the left are Power, Wink
with Light and Wink with Audio buttons. These tools
are similar to those in a Loudspeaker Properties
window, but of course they "Wink' the front grill
lights of all the loudspeakers in the Group, or send
an audio signal (sine wave signal or pink noise) to
all of them.
The Power button puts all amplifiers in the Group in
Standby or turns all of them On. The Input Volume
control and Mute button also affect all amplifiers in
the Group. Group metering is not available.
The Input selection radio buttons in the light grey
area operate in the same way these controls
operate for individual loudspeakers, but control all
loudspeakers in the Group.
A Group Control mode window is identical to the
one used for individual loudspeakers except for
the lack of level meters and the addition of a row of
Group Assign boxes under the EQ filters.
When the Group Assign boxes are checked, Group
EQ and dynamics settings override individual
loudspeaker settings – that is, the settings you
define in the Group window will be uploaded to all
loudspeakers in the Group. Any EQ filters you do
not assign to Group control will be available within
each individual loudspeaker's properties folder.
Whenever you assign an EQ filter or the Com-
pressor to Group-level control,a Warning prompt
pops up to remind you that you will be overwriting
individual loudspeaker settings.
These controls will be "grayed out" in the individual
loudspeaker Properties windows to show that they
are under Group control and unavailable.
All Loudspeakers functions in the same fashion as
Group control, except it includes all loudspeakers in
the system in the Group.
38