Parental Control; Set Lock; Channel Lock; Installation Lock - FTE Maximal MAX IP90 User Manual

7. Parental Control

With this menu, you can activate the parental control where is necessary
to give one password before opening channels or making settings.
7.1.

Set Lock

To activate the parental control, select with
and then press .
You have to give the standard code 0000 or your individual one with the
numeric block from the remote control. Then press OK button.
7.2.

Channel lock

Here you can activate the parental control for channels if you have marked
it in Channel Management for Lock.
For this, select with the buttons
and than press .
You have to give the standard code 0000 or your individual one with the
numeric block from remote control. Then press OK button.
7.3.

Installation Lock

Here you cane activate the parental control for the menu Parental control,
System Settings and Installation.
For this, select with the buttons
and then press .
You have to give the standard code 0000 or your individual one with the
numeric block from remote control. Than press OK button.
7.4.

Change Password

When you want to change the standard password, select for this with the
buttons Change Password and press OK button.
Old Password
New Password
Retype Password
If you loose in any time the standard or your individual password you can unlock it with master
password 5100.
Technical changes and mistakes reserve
User's manual · MAX IP90
button Set Lock
the line Channel Lock
the line Installation Lock
Input here the actual password
Input here the new password you want.
Password must have 4 digit.
Retype here the new password
and press OK button.
-
22
-
MAX IP90 Version en_1.0 FTE Maximal