Table of Contents
Advertisement
Installation Manual of Network Cube Camera
10
NOTE:
When the camera is power up, press the 'RESET' button for about 10 seconds, then all parameters,
including user name, password, IP address, port number, etc., will be reset to the factory default
settings.
2.1.3 Camera
Connection
Step1:
Connect one end of the network
cable to the camera and the other
end to PC.
Step2:
Connect one end of the power cord
to the camera and the other end to
power sokcket to supply power for
the camera.
Step3:
Access the camera over IE or client
software to view live video images.
Bracket mounting holes, used to fix the camera to the bracket
3
Advertisement
Table of Contents
