Audio Detection; Schedule Setup - Orantek IP226 User Manual

Audio Detection

When you "Enable" this feature, all suitable for motion detection function can be used for this function
Threshold: Determines at what point the alarm is triggered. A small number threshold means less motion is needed to trigger
the alarm. A big number threshold means more motion is needed to trigger the alarm.
Sensitivity: Determines how easily the camera can detect audio. Lower sensitivity means the camera is less likely to detect the
audio. Higher sensitivity means the camera is more likely to detect audio.

Schedule Setup

The alarm that the motion detection triggers can be set to be active or inactive at certain times of the week.
By default, the schedule is set to be "active" at all times "always".
However you can set the schedule not to trigger alarms at certain times (useful for instance if you don't want alarms to
go off while your office is open from 9am until 5.30pm). You can set up to 4 schedules, and you can use these to send
alarms to different places – such as emails, FTP or SD card.
Always - Enable in any time.
Range - Enable between start time and end time.
Except - Enable except start time to end time.
Click Apply to confirm your setting.
28