Camera Setting - Orantek IP226 User Manual

Camera Setting

1. Click on Setting from the home page, or click on the "Settings" word from your Live View page.
Note: If you are installing the camera for the first time or after a reset to factory defaults, you are advised to change the
cameras default password. * The Administrator username is always "admin" in lowercase.* Once you have typed your
password twice, click Save. The system will then ask you to login again.
Click on "System" at the top right of Settings page will list the System information. This screen is one of the most useful
in Settings. This screen lists information you may need if you want connect to your camera from other systems. It's a
great way to check if your camera has all the details needed to operate correctly.
Firmware Version – Your current firmware version.
Check the y-cam.com website to see if there are
updates for your model.
Wireless – The current status and strength of your
wireless connection if in use.
IP address – The internal IP address of your camera so
you can access it on your local network.
DNS Servers – If this option is empty, it may prevent
your camera from sending email alerts. Enter the DNS
in the TCP/IP menu if needed.
DDNS – If you do not have a static IP address, a DDNS
service helps you access your camera easily from
outside your network. This confirms the DDNS is active
or not.
UPNP – If your router has UPNP and it has successfully
worked with your camera, this will tell you here. This
saves you forwarding any ports.
Internet URL – This is the external address and Port of
the camera.
Storage – Lets you know if storage is available on SD
card or NAS drive.
12