Night Vision Setup - Orantek IP226 User Manual

Night Vision Setup

Only IR IPCAM has infrared LED, which can be opened automatically when camera check dark environment.
Infrared LED control - When the environment is dark, the LED will be opened automatically due to a photosensitive
component. Users also can select open or close the infrared LED manually.
Black and white mode -"Auto" switches the video from color to monochrome when the IR LEDs are turned on. "On"
switches the video to monochrome irrelevant of the status of the IR LEDs. "Off" forces the camera to stay in color mode
even when the IR LEDs are on.
IR cut filter control - IR is present naturally in day light, this can cause discoloration of images where the greens can look
purplish. The IR cut filter blocks these IR lights from coming back onto the lens of camera, and this gives a true day
image.
Note: if the IR cut filter is on during night, the night vision will not work. It is recommended to leave the IR cut filter
control to Auto at all times, to achieve best results from the camera.
Click Apply to confirm your settings.
17