Wireless Setup - Orantek IP226 User Manual

Network

Wireless Setup

The camera corresponds to the wireless system based on IEEE802.11b/g/n. Encryption establishes the security to
prevent unauthorized users to access the wireless data communication.
SSID - Type the ID of the wireless network you want to connect with or click Search for available networks.
Mode - Infrastructure mode and Adhoc mode
Adhoc Mode: Select Adhoc mode when the camera is directly connected to your computer.
Infrastructure Mode:
Security mode - WEP64bit or WEP 128bit
Authentication - Select WEP authentication mode.
WEP Key type - Select the WEP key type. Either in hexadecimal or
WEP key Index - Specify up to 4 WEP keys.
WEP Key - Type the password.
Security mode - Security mode is not only WEP64bit or WEP128bit but also WPA -PSK or WPA2 -PSK.
Encryption type - TKIP and AES.
WPA key -Type 8 -63 characters as password.
Click Apply to save changes.
Note: These settings have to match those of your access point or router. Please consult your access point or router
manual on how to verify or modify these settings.
Select Infrastructure mode when the camera is connected via an access point or router.
Click Test to test whether connection is successful.
ASCⅡ characters.
18