Setting Of Date And Time; Setting Language - FingerTec Keylock 8800 User Manual

Once an administrator is enrolled in the Keylock 8800, any attempt to access into the
Main Menu will prompt the terminal to display "Admin Affirm". The administrator's
fingerprint or password is required to access to other features.

SETTING OF DATE AND TIME

Keylock 8800 is useful for time attendance and door access control. To make sure that
the device is capturing the correct date and time of an access. Main Menu > Options >
System Option > Set Date Time > OK

SETTING LANGUAGE

Select language for Keylock 8800 according to your preference. Menu > Options >
System Option > Select Language > OK
CLEANING
Wipe Keylock 8800 with a dry piece of cloth to maintain the shine of the terminal.
Clean Fingerprint
Clean the fingerprint scanner with a microfiber cloth.
RESTARTING AND RESETTING KEYLOCK 8800
If something isn't working right, try restarting or resetting Keylock 8800.
Restart
Every Keylock 8800 comes with two sets of mechanical keys for emergency.
To restart the unit, you need to access using mechanical key. Open the back plate
and remove one of the batteries. Put it again and press OK/Menu button to turn on
Keylock 8800.
Reset
Make sure that you have confirmed to reset all the settings back to factory set-
tings because once you press the OK button. To reset to factory setting, press Menu >
Options > System Options > Adv Options > Reset Opts > OK
Please contact support@fingertec.com in cases where you need to bypass the ad-
ministrator's privilege and reset the unit. FingerTec Worldwide would require some
verifications from you before any information is released.
7
CONTENTS