Mixing Configurations 2B-6; Basic Stereo Mixdown 2B-6; Additional Send Mixing 2B-6 - Solid State Logic AWS 924 Owner's Manual

AWS 948 Tutorial
Mixing Configurations
When mixing in In-line mode, the secondary channel path can be employed either as an additional send from the channel,
as the right input of a stereo signal, or as an independent additional input path, allowing up to 48 signals to be mixed on the
console. Because channels are independently configurable, additional inputs might be assigned to channels not requiring
extra sends, allowing those signals that do require the extra send to take advantage of both channel paths.
Basic Stereo Mixdown
Basic stereo mixdown uses the channel in Stereo mode:
Chan 1
Input:
Line In
Stereo
Left,
DAW
Line In
track
out
Right
Additional Send Mixing
In the Additional Send configuration (In-line Mix mode with the in-channel RETURN switch unselected), the second
channel path can be sourced pre- or post-fader, and each of the sends can be switched between them. This allows for a high
level of flexibility of send leveling and automation. The channel's signal processing is applied to both channel paths. The V-
pot controls the additional send level and the fader the main channel contribution to the Mix and/or Record busses.
DAW
track
out
AWS 924-948 Owner's Manual
Page 2b-6
Channel Path A
Signal
Processing
Channel Path B
Channel 1
Channel Path
Input:
Line In L
Signal
Processing
FX
Sends
External processing
FX Snds
Track Bus 1
Mix Bus
Monitoring
FX Rtns
Stereo
Master
Mix Bus
FX Rtns
External processing
AWS 924-948 Owner's Manual
DAW
Monitoring
Stereo
Master
DAW
Page 2b-6