Kodak Pixpro AZ651 User Manual page 131

Message
Cannot change settings
under this mode.
Improper alignment.
Please try again.
Connection Failed!
In this capture ********
Still size limited to ** M
Capture reached
maximum limit
130
Description
Appears during shooting mode if a
function can not be set by rotating the
function ring.
The offset is too big for panorama
shooting.
In the case of failing to connect to a PC
or a printer.
In the case of failing to connect to a TV-
system (including HDMI).
After choosing the image size in the
Function Ring (Smart), this message
may occur when the still size limit is
reached.
Press the shutter to capture images
in recording a video. If the number of
images captured exceeds 15, there will
be a prompt if you press the shutter
again.
Action
Remove the message after
2 seconds and return to
shooting.
Remove the message after
2 seconds and return to
shooting.
Remove cable and retry
connection
Remove the message after
2 seconds and return to
shooting.
The message will
disappear in 2 seconds
with no influence to video
recording.