BEFORE YOU START Declaration of Conformity Responsible Party: JK Imaging Ltd. Address: JK Imaging Ltd., 17239 South Main Street, Gardena, CA 90248, USA JK Imaging Europe, 71 Clarendon road, Watford, WD17 1DS, UK Company Website: www.kodakpixpro.com INDUSTRY CANADA This device complies with Canadian RSS-210. This device complies with Industry Canada license-exempt RSS standard (s).Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Page 3
For Customers in Europe This symbol [crossed-out wheel bin WEEE Annex IV] indicates separate collection of electrical waste and electronic equipment in the European countries. Please do not throw the equipment into domestic refuse. Please use the return and collection systems available in your country for proper, safe disposal of this product.
Page 4
Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) - EN 300 328 V1.8.1 : 2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems;...
Page 5
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 6
All trademarks mentioned in this manual are used for identification purposes only and are properties of their respective owners. This manual will instruct you on how to operate the KODAK PIXPRO Digital Camera. JK Imaging Ltd. has tried its utmost to ensure the correctness of the user manual contents, but reserves the right to modify as necessary.
SAFETY NOTES Safety notes for this camera Do not drop the camera or allow it to hit When you take the camera from a cold place solid objects. to a warmer environment, condensation may occur. Please wait for a reasonable period of Do not attempt to disassemble or repair the time before you turn it on.
Page 8
Safety notes for battery Please use a battery that is the same type Do not heat the battery or throw it into a as the one included. fire to avoid a possible explosion. Please use the attached charger to charge Do not store the battery in a hot environment the battery.
Page 9
Safety notes for memory card We suggest buying only well-known, Do not modify the name of the files or name brand memory cards to ensure peak folders of the memory card using your PC. performance. Modifying the file names may cause the files to not be recognized on the camera or Format the memory card using the camera a possible error may occur.
Page 10
Other Safety Notes Do not disconnect the power or turn the camera off during the update process. Doing so may cause incorrect data to be written and the camera may not power on later. Do not hang the neck strap of the camera around the neck of a child. When using your camera on an airplane, observe the relevant rules specified by the airline.
CONTENTS BEFORE YOU START .....1 MODE OVERVIEW ......27 LCD Display ..........27 SAFETY NOTES ......6 Overview of the Screen Icons in Shooting Mode ........27 CONTENTS ........10 Overview of the Screen Icons in Movie Mode ..........29 GETTING READY ......14 Overview of the Screen Icons in Playback Mode ........30 Accessories Included ........
Page 12
PLAYBACK ........71 AF Area ............55 Macro Mode ..........56 Viewing Photos and Videos ....... 71 Self-timer Mode .......... 57 Thumbnail View ........... 72 Flash Mode ..........58 Using Zoom Playback (for still pictures only) ............... 73 WB (White Balance) Mode ...... 60 Continuous Shot Group Playback ....
Page 13
Movie Size ..........83 Touch-up ..........96 Quality ............84 Resize ............97 MF (Manual Focus) Assist ....85 Playback Settings ........97 AF Assist Beam ........86 Protect .............98 Digital Zoom ..........86 Delete ............98 Shoot Setting 2 ..........87 DPOF (Digital Print Order Format) ...99 Date Imprint ..........88 Trim ............
Page 14
File Numbering ........106 Video System ..........116 Reset Settings ........107 Supported HDMI Connections ....117 Version ..........107 Connecting HDMI-Ready TV ..117 HDMI CEC Control ........118 CONNECTION SETTINGS ..108 Set Eye-Fi SD Card Connection Mode ... 123 Connecting to a Computer ......
GETTING READY Accessories Included Your camera box should contain the camera model you purchased along with the following accessories. If anything is missing or appears to be damaged, please contact your retailer.(Based on sales in different countries or regions, the shape of the AC adapter will vary. Please subject to the actual product will prevail.) Rechargeable AC adapter...
Installing Battery and Memory Card 1. Open the battery cover. 2. Insert the battery into the battery compartment according to the negative and positive directions as illustrated in the picture. Push the battery down until it locks in place. Battery lock knob...
Page 21
3. Insert the memory card into the memory 4. Close the battery cover. card slot as shown in the diagram. Write protection buckle The memory card (SD/SDHC) is optional and not included in all camera packaging. If you have to purchase a memory card, select one with storage capacity between 4GB and 32GB to ensure correct data storage.
Charging Battery Please insert the battery and charge it under shutdown mode. 1. Connect the camera and the power charger using the supplied Micro USB cable. 2. Insert the plug of the power charger into the power outlet to charge the battery. After the battery is stored for a long period of time, use the supplied power charger to charge the battery prior to...
Vari-angle LCD The LCD is housed in the camera’s body. You may follow the directions shown below to move it as needed: 1. Turn on the LCD along the direction shown by arrow ①. 2. Available to rotate 180° along the direction shown by arrow ② . 3. Available to rotate 90°...
Turning Camera On and Off Press the power button to turn the camera on. To turn the camera off, press the power button again. Power Button When the power is off, press and hold the button to power on and enter playback mode.
Set your Language, Date/Time Set your Language, Date/Time after the first power-on Language 1. When you turn the camera on for the Sound Settings Sound first time, the language selection screen Power Saver Powe Auto Auto appears. Language Langu English nglish 2.
Resetting your Language After you set your language for the first time, follow the instructions below to reset your language. Sound Settings 1. Press the button, press the [ Power Saver Auto ] button to select , and press Language English button to enter the menu.
Resetting Date/Time After you set your Date/Time for the first time, follow the instructions below to reset date and time. 1. Press the button, press the [ Sound Settings ] button to select , and press Power Saver Auto button to enter the menu. Language English 2.
MODE OVERVIEW LCD Display Overview of the Screen Icons in Shooting Mode 9 10 11 00:00:00 0000 x3.0 EV-0.0 F00.0 0/0000 ISO00000 1 Eye-Fi ON (with signal) Video Pixels Color Effect Zoom Display(By turning the 2 Focus Mode No Memory Card Zoom Lever) Number of Pictures in Static 3 Quality...
Page 29
00:00:00 0000 x3.0 EV-0.0 F00.0 0/0000 ISO00000 Lens Function Ring 24 Focus Frame White Balance Custom Settings Exposure Compensation ISO Value AF Area Value Shutter Speed 26 Shooting Mode Expo Metering Single / Continuous 22 Histogram 27 Custom Settings Shot / HDR / WDR / AE Bracketing 23 Aperture Value Macro Mode...
Overview of the Screen Icons in Playback Mode 2014/04/23 000-0000 0000 Thumbnail3x3 Eye-Fi ON (with signal) Image Area Quality Zoom Magnification Area Capture Date Image Zoom Ratio File Name Index Prompt Shooting Pixel Ratio Touch-up Image Size Battery Status DPOF File Icon Continuous Shot Group Playback File Protection Icon...
How to take pictures 1. Hold the camera with both hands as shown in the figure, not blocking the flash and lens by fingers. 2. Aim the camera at the object and then frame with the LCD. 3. Use the zoom lever to select Tele or Wide positions to zoom in or out on your subject.
Using the Mode Dial This camera provides a convenient mode dial that allows you to manually switch between different modes with ease. The available modes are listed below: Mode Name Icon Description In this mode, the optimal conditions for taking pictures will be set based Auto Mode on the subject and environment.
Page 34
This mode is for manually setting the aperture, shutter speed and ISO Manual Mode value. This mode automatically enhances facial features with skin softening Face Beautifier touches and eye brightening capabilities. Enable image transmission and remote control by connecting smart Wi-Fi Mode device with Wi-Fi.
Page 35
1. Turn the mode dial to select the Please refer to the table below if any mode you want. nonadjustable options in mode: (O: Optional X: Not optional) 2. Press the button to configure settings. 3. Press the [ ] button to select Options Aperture Shutter an adjustment setting.
Face Beautifier 1. Turn the mode dial to select face beautifier mode ( 2. Press the button and press the [ ] button to select 3. Press the [ ] button or rolling the jog dial to select an option and press the button to confirm and enter the shooting screen.
Wi-Fi Mode Enable image transmission and remote control by connecting smart device with Wi-Fi. Matters needing attention before use: Please confirm that your smart device is a smart phone with Android 2.3 or 4.x system, a tablet computer with Android 4.x or is an iOS 6/7 system. If not, please upgrade your smart device before using the APP.
Page 38
AP Mode This camera may connect with your smart 1. Rotate the mode dial to and then enter device through Wi-Fi. the Wi-Fi selection interface. 2. Press the [ ] button to select Settings of Camera: and set options. 1. Select and press the button to enter the setting interface.
Page 39
Station Settings of Smart Device: Enable image transmission and remote control by connecting the camera with a Wi-Fi access 1. Enable the Wi-Fi of smart device and then point created by your smart device. search surrounding wireless devices. 2. Select the name of camera SSID to be 1.
Page 40
Press the [ ] button to select: Enter Password • Scan: Search again surrounding wireless devices. • Select the name of device to be connected. • Back: Back to Wi-Fi mode select screen. Type the network security key 4. Press the [ ]/ [ Save Cancel...
Page 41
Display of Wi-Fi Connection Status: The Wi-Fi has successfully connected but APP 5. Connect to network after storing the is not enabled. password. • If connected, the LCD will display as shown below: The Wi-Fi has successfully connected and APP is enabled.
Page 42
Setting The name of this camera can be changed For interrupting the connection: through key stroking. Wi-Fi Mode 1. Select the and then press the Disconnect from device? button to enter the setting interface. 2. Press the [ ] button to select options to be adjusted and then press button to enter the menu.
Page 43
Refer to the "PIXPRO Remote Viewer User The default name of DSC device is「PIXPRO Manual" located on the web: AZ651」. Change the name of DSC device through key stroking. Americas DSC device PIXPRO AZ651 http://kodakpixpro.com/Americas/ Name between 1-18 Letters support/downloads.php Save Cancel Europe For the method of input, please refer to the introduction on password input on page 39.
Scene Mode You can select an appropriate mode from the 14 scene modes according to the type of environment you are shooting. The camera then configures the most appropriate settings automatically. 1. Rotate the mode dial to , then the LCD will display as below: Auto Scence The camera automatically detects the most suitable shooting scene.
Page 45
Scene Description Auto Scene The camera automatically detects the most suitable shooting scene. Panorama Mode For shooting up to 360-degrees of landscape. Handheld Night Reduce blur when shooting low light/ illuminated scenes. Multi Exposure Take several shots and overlap as a single image. The camera automatically takes a picture when a dog or cat face is Cat/Dog detected.
Page 46
Auto Scene (ASCN) In “ASCN” scene mode, the camera can detect different environments intelligently and automatically select the best scene and photo settings for you. “ASCN” can intelligently detect the following scenes: Mode Name Description The camera will automatically adjust the exposure and focus to ensure the Auto best possible pictures.
Page 47
Panorama Mode This feature allows you to capture a panoramic 3. Compose your shot on the LCD and half view that will have significantly more content press the shutter button to focus on the than a single photograph. Follow the instruction subject.
Page 48
Multi Exposure Panoramic image can be played back by Suitable for shooting moving objects (as many as 6) in the same background. the method of flash playing. Please see the animation panoramic playback on Keep camera steady before shooting. page 75. Press and hold the shutter button to take 6 photos continuously when it will stop During shooting, the flash, self-timer,...
Page 49
Functions that can be adjusted in each scene are as below: Scene Adjustable Functions Auto Scene Flash* /Self-timer Panorama Mode None Handheld Night Expo Metering/Self-timer* Multi Exposure Expo Metering Cat/Dog Auto Shooting/Continuous Shot/Expo Metering/Macro Snow Continuous Shot/Expo Metering/Flash/Self-timer Party Continuous Shot/HDR/Expo Metering/Flash/Self-timer/Macro Sport Continuous Shot/Expo Metering Night Portrait...
Custom Settings The user can store the frequently used shooting modes and parameters and switch to Go to setting CS mode this mode for quick adjustment. Settings under mode (unset state or state after reset): 1. Turn the mode dial to select the mode, and enter the setup screen, as shown in the Rotate the mode dial to skip.
Page 51
7. Turn the mode dial to switch to the custom 5. Press the [ ] button select「Custom settings ( Settings」and press the button to enter the menu. 8. The photo settings you stored the last time are invoked. Date Imprint When the mode is used for the first Quick Review...
BASIC OPERATION Using EVF (Electronic View Finder) EVF functions as the LCD, which can be used to observe the scene and objects and for playback, preview and menu operations. EVF has the following advantages: It will not be affected by ambient light and may avoid poor composition due to light reflection on the LCD.
Using the Zoom Function Your camera is equipped with two types of zoom functions: optical zoom and digital zoom. Zoom x3.0 Toggle the zoom lever of the camera to zoom in Indicator or out of the subject while taking pictures. EV-0.0 F00.0 0/0000...
Display Setting Mode: Press the button to switch among 4 screens. Function Message Display No Message Display 00:00:00 0000 x3.0 EV-0.0 F00.0 0/0000 ISO00000 EV-0.0 F00.0 0/0000 ISO00000 Message Display Display with Grid and Histogram x00.0 00:00:00 0000 00:00:00 0000 x3.0 EV-0.0 F00.0...
Page 55
Mode: Press the button to display the playback screen, press the button to switch among 3 screens. No Message Display Function Message Display 0000/00/00 000-0000 Thumbnail3x3 Detailed Message Display 0000/00/00 000-0000 EV-0.0 000mm F00.0 0/0000 ISO00000...
AF Area In different photo shooting modes, you can Spot Focus select different focus methods. Choose the single-point focus (Adjustable in mode) position within the scope of focus. 1. Press the [ ] button to display the Object Tracking: settings screen. Smart tracking of the object in motion under the focusing shooting.
Macro Mode The Macro Setting is ideal for shooting small objects or close-up photos. This mode allows you to focus on subjects very close to the camera. 1. Press the [ ] button to enter the Marco Menu. Macro On 2.
Self-timer Mode Using this function can take photos at regular • Self-timer 10sec time. The camera can be set to shoot after 2 A single picture is shot 10 seconds seconds, 10 seconds since pressing the shutter after the shutter button is pressed. or shoot after smile.
Flash Mode When enabling the smile detection, The flash provides supplemental light for the pressing the shutter or the button can scene. The flash is usually used when shooting disable the self-timer and return to the against the light to highlight the object; it is shooting screen while keeping the self- also suitable for metering and shooting in timer smile setting.
Page 60
• Fill Flash For fill flash at the moment of taking a picture. • Flash Auto Camera flash goes off automatically based on existing light conditions. • Red-Eye Reduction The camera emits a brief pre-flash before the picture is taken to reduce red-eye effects. •...
WB (White Balance) Mode The white balance function allows adjustment of • the color temperature for different light sources. • Daylight (Adjustable in Mode) Follow the steps below to set white balance of • Cloudy the camera: • Fluorescent 1. Press the button to enter white balance •...
Page 62
WB Bracketing: Press the button to enter options and then press the [ ]/ [ button to adjust the shift and roll the jog dial to adjust the BKT value (0, 1 and 2). Rotate clockwise to adjust X axis (B-A).BKT value Rotate counterclockwise to adjust Y axis (G-M).
Continuous Shot Mode Functions that can be enabled under each • Continuous Shot mode may be different. For taking more than one picture Mode: continuously. For setting the single, continuous shot, • Cont.Shot-Fast (2M) Time-Lapse, HDR , WDR or AE bracketing For continuous shot with 2M pixels.
Page 64
Mode: • WDR (Wide Dynamic Range) When the camera detects that there is a big contrast in Single brightness between scenes and such scenes are against the light, it will automatically adjust the brightness and saturation to capture an image that better represents the scene.
Exposure Compensation Functions Setting The EV function menu of the camera includes EV Adjustment functions, such as EV adjustment, ISO, shutter Set up to adjust the picture brightness. In adjustment, aperture adjustment, etc. Using the the case of a very high contrast between the appropriate function settings can improve your photographed object and the background, the pictures.
ISO Adjustment Shutter Speed Adjustment ISO allows you to set the sensitivity of the For shutter speed, the camera may camera sensor. Please use a higher ISO value automatically set the aperture value in darker places and a lower value in brighter corresponding to the manually set shutter conditions.
Using Quick Recording Aperture Adjustment You can adjust the aperture size value. In shooting mode, press the button to begin Selecting a large aperture opening will recording video. emphasize the point of focus and show a blurry background and foreground. A small aperture opening will keep both the background and main object in clear focus.
i Button Function Menu Functions that can be enabled are different • Partial Color-Red under each mode. • Partial Color-Yellow Mode: • Partial Color-Blue The image color setting allows you to select • Partial Color-Green different effects. 1. Press the button to select the Image •...
Using the Lens Function Ring There is a lens function ring lever in one side 2. Rotate the lens function ring to optically zoom of the lens. Moving it up and down can switch the object. among ZOOM/AF, SMART and MF mode. Zoom/AF Mode x3.0 Rotate the lens function ring for optical zoom.
Function Ring (Smart) Mode Rotate the lens function ring to set parameters of 3. Press the button to complete the setting aperture, shutter, ISO, EV, etc. and enter shooting screen. Switch the lens function ring lever to position The selection of functions of Function Ring (Smart) in the menu is needed before using Function Ring (Smart) mode.
MF(Manual Focus) Mode Rotate the lens function ring for manual focus. 2. If the lens function ring is operated or rolling jog dial , the focus enlargement 1. Switch the lens function ring lever to position frame will appear on the LCD. After clear focus is achieved through manual adjustment, press the button to close...
PLAYBACK Viewing Photos and Videos For viewing taken photos and videos on the LCD: 1. After pressing the button, the last photo or video clip taken will be displayed on the LCD. 2. Press the [ ] button to scroll through the photos or video clips stored in the built-in memory or on the memory card.
Thumbnail View When in playback mode, rotate the zoom 2. Press the [ lever counter to the position to display ] button to select a picture or video thumbnail images of the photos and videos on clip to view and press the button to the screen.
Using Zoom Playback (for still pictures only) When playing back photos, you can also use the zoom lever to zoom in on the photos 2 to 8 times. 1. Press the button to switch to playback mode. 2. Press the [ ] button to select a picture to be zoomed in.
Continuous Shot Group Playback High speed (VGA) and fast (2M) can make Continuous Shot for group image playback. 1. Press the button to enter playback screen. 2. Press the [ ] button to select continuous group. 3. Press the button to start playback. 0000/00/00 000-0000 0000/00/00...
Animation panorama play Panoramic animation playing is to play full size image in accordance with the shooting direction. After playing, it will automatically return to the static screen of panoramic image. 1. Press the button to enter playback screen. 2. Press the [ ] button to select animated panoramic photos.
Slideshow This setting allows you to view all the stored images as a slideshow. 1. Press the button to enter playback screen. 2. Rotate the zoom lever counter to the position to display thumbnails 3x3 and then press the button to select the index mode. •...
Photos and Video Deletion In playback mode, press the [ ] button to delete your photos and videos. To delete photos or videos: 1. Press the button to switch to playback mode. 2. Press the [ ] button to select the photos or videos to be deleted. 3.
USING THE MENUS Shooting Menu Mode: 1. In shooting mode, press the button to 2. Press the [ ] button to enter the shooting menu. select the shooting menu to be set. 12 options in [ Shooting Menu ]: 3. Press the [ ] button or rolling jog dial to select options of the •...
Expo Metering OIS (Optical Image Stabilization) Use this setting to select the “target” size of This mode can help reduce photo blur caused the camera’s field of view to be metered. by unintentional hand shake, or low light. OIS: On Expo Metering: AiAE •...
Beautifier Select Scene Set the effect of the face beautifier mode. Select the scene mode under the SCN mode. Select Scene Beautifier:Effect 1 Skin Soften • Effect 1: Skin Soften • Effect 2: Skin Soften + Eye Brightening • Effect 3: Skin Soften + Eye Brightening + Eye Enlargement...
Shoot Setting1 Mode: 1. Press the button, press the [ 4. Press the [ ] button to ] button to select select the item to be set and press the button to enter the menu. 2. Press the button to enter the menu. 5.
Image Size The size setting refers to the image resolution in pixels. A higher image resolution allows you to print that image in larger sizes without degrading the image quality. Image Size Image Size Image Movie Size Movie 1920x1080 30fps 30fps 18M-3:2 Quality...
Movie Size Set the image resolution used during video recording. Movie Size Image Size Image 1920x1080 30fps Movie Size Movie 1920x1080 30fps 30fps 1280x720 60fps Quality Quali JPG Fine G Fine 1280x720 30fps MF Assist MF A 640x480 30fps AF Assist Beam AF As 640x360 120fps Digital Zoom...
Quality * The longest recording time is 29 minutes The quality setting can be used to adjust the at one time. image compression ratio. Quality When recording in higher pixel resolutions Image Size Image RAW+JPG for extended periods of time, this can Movie Size Movie 1920x1080 30fps...
If RAW or RAW+JPG is selected, the settings The RAW file format provides lossless of Colour Effect, Continuous Shot, Cont. Shot- compression of the image data, which High Speed, HDR and AE Bracketing cannot be is not processed by the camera. The adjusted.
AF Assist Beam Digital Zoom In a darker environment, AF assist beam can be This setting is for adjusting digital zoom. If turned on for better focus. this function is disabled, only optical zoom can be used. AF Assist Beam Digital Zoom Image Size Image...
Shoot Setting 2 Mode: 1. Press the button, press the [ 4. Press the [ ] button to ] button to select select the item to be set and press the button to enter the menu. 2. Press the button to enter the menu. 5.
Date Imprint Quick Review Include a Date/Time stamp on the photo This option enables a brief review of images image. immediately after capture. Each picture will be displayed on the LCD per the selections below. Date Imprint Quick Review Date Imprint Date Quick Review Quick...
Face Detection Cont. AF For detecting and focusing on faces to make all Enable the continuous AF to be able to continuously focus automatically when taking faces as clear as possible in photo mode. pictures. Face Detection Cont. AF Date Imprint Date Date Imprint Date...
Custom Settings 2. Press the shutter button half-way down Custom Settings stores the current photo to focus. The LCD will show a green focus shooting mode and its parameters. The stored frame when the subject is in focus. mode and parameters are directly invoked in Custom Settings mode.
Function Ring (Smart) The options listed below can be set as Function • Continuous Shot Ring (Smart) Custom. Once set, the chosen • Color function can be quickly adjusted with the lens function ring during shooting. • White Balance Function Ring (Smart) •...
Playback Menu Menu Mode: 7 options in [ Menu ] 1. Press the button to display the playback screen and press the button to enter the • Shoot Settings 1 menu. (See P81 for details) 7 options in [ Playback Menu ]: •...
Display Mode Rotate You can use this setting to change the orientation of the picture. Date Folder Date Mode: Arranged by date. Exit Back Normal Mode: Display all images. : Exit Date Mode: Arranged by date. : Turn Left Cont. Photo Mode: Arranged by Cont. Photo Group.
Color This setting allows you to change the picture • Vignetting color effect. The file is saved as a new photo and • Salon stored in memory together with the original photo. • Punk (4M) • Negative (8M) • Fish Eye •...
With the HDR function, pictures that are Select with HDR : overexposed may be corrected to optimize the highlights and lowlights captured to more 0000/00/00 000-0000 accurately represent the actual scene. Exit Thumbnail3x3 After using the HDR function, the image will be saved as a new file and the original file is still stored in the memory.
Touch-up The playback beauty feature allows for Select with touch-up: beautification using three individual effects. 0000/00/00 000-0000 Exit Thumbnail 3x3 : Exit : Red-Eye Reduction : Skin Soften : Eye Brightening : Eye Enlargement Using the face beautifier mode allows you to select from single, two, or all three effects combined.
Playback Settings Resize This setting allows you to resize a picture to Mode: a particular resolution and saves it as a new 1. Press the button, press the [ picture. ] button to select 2. Press the button to enter the menu. 3.
Protect Delete To prevent any pictures or videos from being You can delete one or all photo/video files. accidentally erased, use this setting to lock one Delete or all of the files. Protect Prote Protect Delete Delet Date Folder Protect Protec DPOF DPOF...
DPOF (Digital Print Order Format) The “ ” indicator means a file is The DPOF feature allows you to compile and protected. File protection must be select a group of pictures that you would like removed first before a file can be deleted. to print and will save your selection on the memory card so that you can use the memory Deleting files will cause DPOF settings...
Trim Play Slide Show The Trim setting allows you to crop photos and This setting allows you to view all the stored save them as new pictures. images as a slideshow. 1. Select「Yes」to confirm trim. Toggle the Play Slide Show zoom lever or rolling the jog dial to Protect...
General Settings Mode : 1. Press the button, press the [ 4. Press the [ ] button to ] button to select select the item to be set and press the button to enter the menu. 2. Press the button to enter the menu. 5.
Sound Settings Power Saver With this setting you may adjust the sound This setting allows you to save power and get volume. the maximum possible running time for your camera's batteries. Turn the LCD and camera Press the [ ] button to adjust the off automatically after a consecutive period of volume and press the button to confirm our...
Language Date & Time Refer to the “Reset your language” section on Refer to the “Reset Date/Time” section on page 25. page 26. World Time LCD Brightness The World Time setting is a useful function for Use this setting to adjust the brightness of your your overseas trips.
File Settings Mode : 1. Press the button, press the [ 4. Press the [ ] button to ] button to select select the item to be set and press the button to enter the menu. 2. Press the button to enter the menu. 5.
Format Please note: formatting enables you to delete all contents in the memory card or built-in memory, including protected photo and movie files. Format Doing so will clear all data. If you select「Yes」the camera formats its memory. If there is no memory card in the camera, the built-in memory will be formatted; if there is a memory card, it will be formatted only.
Copy to Card File Numbering Use this setting to copy the files stored in the After you take a picture or video clip, the built-in memory to a memory card. camera will save it with a sequential number. You can use this to reset the file numbering Copy to Card to 1.
Reset Settings Version Use this setting to restore the camera to its Use this setting to view the current camera original default settings. firmware version. Reset Settings FW Version: X.XX Reset camera settings to factory defaults. When there is a new firmware version in the memory card, select「Yes」to update.
CONNECTION SETTINGS Connecting to a Computer You can use a Micro USB cable to connect 4. Press the [ ] button to the camera and copy (transmit) photos to a select「PC」and press the button to computer, printer or other device. confirm.
Transferring files to your computer The computer will automatically detect the camera as a removable drive. Double-click the my computer icon on the desktop to locate the removable drive and to copy folders and files in the drive to a directory on your PC as you would copy any typical folder or file.
Connecting to a PictBridge Compatible Printer PictBridge technology allows 3. Press the [ ] button to printing of the photos saved in the select「USB」and press the button to memory card by the printer. enter the menu. To find out if a printer is PictBridge 4.
Connecting to your Printer 1. Make sure the printer is turned on. If the camera is not connected to a PictBridge compatible printer, the following error message 2. Connect one end of the supplied Micro will appear on the LCD. USB cable to the Micro USB port on your camera.
Using the PictBridge Menu After setting the USB mode to printer, the Print (with Date) PictBridge menu will appear. If you have set the date and time on your camera, the date and time will be recorded and PictBridge saved with each photo you take. Print (with Date) 1.
Print (without Date) Use this setting to print the photos without 3. Press the [ ] button dates on them. to select the number of copies for the currently displayed photo. 1. In the PictBridge menu, select「Print 4. Press the button and the following (without Date)」and the screen as shown below appears.
Print Index You can print all photos in the camera via this PictBridge function. Print ( Date) Without 1. In the PictBridge menu, select「Print Index」and the screen as shown below appears. PictBridge Cancel Print Index 5. Select「Yes」and press the button to confirm;...
Print DPOF Images Exit To use DPOF printing, you must select your Select「Exit」to exit the PictBridge menu. At photos for printing using the DPOF settings this time, the message「Remove USB Cable!」 beforehand. See “DPOF” section on page 99. appears on the screen. 1.
Video System You can use the AV cable (which should be TV-System purchased separately) to connect the camera USB Mode USB M and the television for realizing the video output. TV-System TV-Sy NTSC NTSC NTSC Connect one end of the AV cable to AV port HDMI CEC Control HDMI of the camera, connect the other end to AV-...
Supported HDMI Connections Connecting HDMI-Ready TV HDMI (High Definition Multimedia Interface), is a fully digital audio/video transmission 1. Use the cable with high resolution output interface, through which uncompressed audio terminal (which should be purchased and video signals are transmitted. separately) to connect the camera to the television which meets HDMI standard.
HDMI CEC Control After connecting the camera with TV-System, Introduction on Icons you may view pictures taken with the camera Info Hiding/Display on the TV screen and operate the camera with your TV remote control to view and edit all Zoom-in images.
Page 120
The following operations are available during Videos HDMI CEC playback: 9. Movie Length:00:00:00 • 1:1 Single Playback Cont. Group File • Zoom-in Playback First Image Mark • Rotate • Index Playback 12. 000/000:Current Sorting/Total Number of Images in Group • Cont. Group Playback •...
Page 121
1:1 Single Playback: Cont. Group Playback: Pressing the left and right arrow buttons Under the 1:1 single playback mode, press can switch among images. the central button to start playing images in continuous group. Zoom-in Playback: If no images in the camera’s cont. group, Under the 1:1 single playback mode, press there will appear a prompt of no pictures the red button to zoom in images;...
Page 122
Video Play: Press the down arrow button to delete one picture. Under the 1:1 single playback mode, select a video and then press the central button to Press the left and right arrow buttons to edit start playing. While playing, you may use the color.
Page 123
HDMI CEC Connection Full Size Index Cont. Group Panoramic Function Zoom-in Playback Video Play Playback Playback Play File Play (Movable to four Zoom In directions during zoom-in) Zoom Out Rotate (turn left only) Play Slide Show Edit Image Info Hiding/ Display Delete *1 After entering the image edit, relative operation of the beautifier cannot appear until a face is...
Set Eye-Fi SD Card Connection Mode This camera supports wireless connection Eye-Fi for Eye-Fi memory cards. Enable the Eye-Fi USB Mode USB M connection by following the steps below. TV-System TV-Sy NTSC NTSC 1. Press the button, press the [ HDMI CEC Control HDMI ] button to select...
APPENDICES Product Specifications Design and specifications are subject to change without notice. Type 1/2.3” BSI CMOS Image Sensor Effective Pixels 20.68 Megapixels Total Pixels 21.14 Megapixels Focal Length 4.3mm (Wide) — 279.5mm (Tele) 35mm film equivalent 24mm (Wide) — 1560mm (Tele) F number F2.9 (Wide) —...
Page 126
(4:3) (3:2) (16:9) 20MP: 5184×3888 18MP: 5184×3456 15MP: 5120×2880 10MP: 3648×2736 2MP: 1920×1080 Still Image Number of 5MP: 2592×1944 Recording 3MP: 2048×1536 Pixels 0.3MP: 640×480 1920×1080 (30fps), 1280×720 (60fps), 1280×720 (30fps), Movie 640×480 (30fps), High-Speed Movie: 640×360 (120fps) Image Compression Best, Fine, Normal DCF, DPOF (Ver1.1) Support Still Image...
Page 127
Scan Panorama Up to 360° Display 3.0 inch (460k Pixels) Angle Adjustment Image Auto Rotation ISO Sensitivity Auto, ISO100/200/400/800/1600/3200 Focus Mode Single AF, Continuous AF, Object Tracking ,Manual Focus Single Area Focusing, 25-Area-Focusing, Face Detection, Manual Focusing Area Selection Area Focusing Artificial Intelligence AE (AiAE), Center-Weighted Average, Spot Exposure Metering Method (Fixed to Center of Frame), Face AE...
Page 128
Single, Index (9/16 Thumbnails), Slide Show, Date, Burst Shooting, Playback Modes Zoom (Approx. x2 ~ x8) AWB, Daylight, Cloudy, Fluorescent, Fluorescent CWF, Incandescent, White Balance Control Manual WB, Color Temp. (1900K ~ 10000K) Flash Method Pop-up (Auto) Flash Force Off, Flash Auto, Fill Flash, Red-Eye Reduction, Slow Sync., Slow Flash Modes Sync.
Prompts and Warning Messages Message Description Action Warning! Warning before power off when Displaying that it will power off Battery exhausted. the camera battery is exhausted. after 2 seconds. In the case of built-in memory Disappear after 2 seconds and Built-in memory error! error.
Page 131
Message Description Action Appears during shooting mode if a Remove the message after Cannot change settings function can not be set by rotating the 2 seconds and return to under this mode. function ring. shooting. Remove the message after Improper alignment. The offset is too big for panorama 2 seconds and return to Please try again.
Page 132
Message Description Action In the case that there is lock protection Disappear after 2 seconds and Write Protect ! for the card when saving the image. return to the previous image. In the case that the camera detects Disappear after 2 seconds and Card Full ! the card capacity is insufficient when return to the previous image.
Page 133
Message Description Action When a card lower than Class 4 is Remove the message after recording movie above HD, it may be Slow access 2 seconds and return to the accessed slowly and the recording cannot shooting image. be continued. The recording cannot be continued if there are problems which may cause interruption Cannot write to SD...
Page 134
Message Description Action The image may be unable to enter the Remove the message after Too many pictures for quick date playback if the image exceeds 2 seconds and return to processing. the specification in the case of date Thumbnail 3x3 mode. playback.
Troubleshooting Problem Possible causes Solution The battery has been depleted. Recharge the battery. Camera does not turn on The battery is not inserted Correctly reinstall the battery. correctly. Camera turns off suddenly The batteries have been Recharge the battery. during operation depleted.
Page 136
Problem Possible Causes Solution Release the write lock of Cannot write to the The memory card has been the memory card or replace memory card locked. with another card. The number of pictures or folders in the memory card Too many movies to exceed the specifications, so the Delete unwanted files.
Need help?
Do you have a question about the Pixpro AZ651 and is the answer not in the manual?
Questions and answers