Controls And Functions; Front Panel - Yamaha YSP-1100 Owner's Manual

CONTROLS AND FUNCTIONS
INPUT VOLUME
+
.;;.:;;.'.;.;;;.;;;.;;;';;;.;.'; .• ; ./:.:•.• ; ;.!;:.:;;;.;;;.;;;.;;' ; ;;.;;.
~JiJ
STANDBY/ON
BiB
®
CD
OPTIMIZER MIC jack
Use to connect the supplied optimizer microphone to be
used to run AUTO SETUP (see page 30).
®
Front panel display
Shows information about the operational status of this
unit.
@ Remote control sensor
Receives infrared signals from the remote control.
@ INPUT
Press repeatedly to switch between input sources (TV,
STB, VCR, DVD or AUX). See page 39 for details.
Outputs a test tone to experience the sound beam (see
page 72).
®
VOLUME-/+
Controls the volume level of all audio channels (see
page 41).
6
En
®
STANDBY/ON
Turns on the power of this unit or sets it to the standby
mode (see page 25).
• When you tum on the power of this unit, you will hear a click
and there will be a 4 to 5-second delay before it can reproduce
sound.
• In the standby mode, this unit consumes a small amount of
power in order to receive infrared-signals from the remote
control.