Yamaha YSP-1100 Owner's Manual page 89

REMOTE CONTROL FEA TURES
• Setting macros for the TV without the
tuning capability
1
Press and hold CODE SET on the remote
control and then press one of the input
selector buttons to select the input source
you want to set macros for.
Proceed to step 2 while holding down CODE SET.
• Operating macros
1
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
~ TV
MUTE
While holding
I3L li§{~.\l§{.:.~~
. . : \
down, press
~
,- ,- ,-
CODESE
@
\
. .
~ :\
2
Press MACRO on the remote control while
holding down CODE SET.
TV MUTE
While holding
MACRO
~
down, press
~
~ ~
2
Press and hold one of the input selector
buttons for approximately 2 seconds to
select the input source you want to operate
macros for.
The TV input changes at the same time the input
mode "changes.
• Canceling the macros
3
Press INPUT1 on the remote control.
INPUT1
q
1
Press and hold CODE SET on the remote
control and then press one of the input
selector buttons to select the input source
you want to cancel the macros for.
Proceed to step 2 while holding down CODE SET.
4
Press CH +/- or TV INPUT on the remote
control repeatedly so that the screen
changes to the display of the input source
selected in step 1.
TV MUTE
While holding
MACRO
~
down, press
~
~ ~
2
Press MACRO on the remote control while
holding down CODE SET.
3
Press ENTER on the remote control to cancel
the macros.
TV INPUT
~
or
CH
5
Press ENTER on the remote control to
confirm the setting.
85
En