Table of Contents
Advertisement
L.E.D. Functionality – Ethernet LAN LED
LAN Speed State
10Mbps
100Mbps
1Gbps
Activity State
No Link
Linked
Data Activity
Using the Input/output Panel
To access the input/output (I/O) ports, remove the cable cover at the bottom of the unit. A
security screw is included and may be used to secure the cable cover to the touchcomputer.
Below are the I/O descriptions by model:
Note: As a safety precaution, always leave the cable cover door attached when the system is powered
on.
LAN LED Status
No Color
Orange Color
Green Color
ACT LED Status
No Color
Solid (Green Color)
Blinking (Green Color)
User Manual: X-Series Rev A AiO Touchcomputer
SW602213 Rev A, Page 18 of 51
Advertisement
Table of Contents
