Configure Vlan Routing - NETGEAR M4100 Series User Manual

The range of the VLAN ID is 1 to 4093.
9. Use Ports to display selectable physical ports and LAGs (if any).
Selected ports are added to the routing VLAN. Each port has three modes:
• T (Tagged). Select the ports on which all frames transmitted for this VLAN are tagged.
The ports that are selected are included in the VLAN.
• U (Untagged). Select the ports on which all frames transmitted for this VLAN are
untagged. The ports that are selected are included in the VLAN.
• BLANK (Autodetect). Select the ports that can be dynamically registered in this
VLAN through GVRP. This selection has the effect of excluding a port from the
selected VLAN.
10. Use the LAG Enabled option to add selected ports to VLAN as a LAG.
The default is No.
11. Use IP Address to define the IP address of the VLAN interface.
12. Use Network Mask to define the subnet mask of the VLAN interface.

Configure VLAN Routing

You can configure VLAN Routing interfaces on the system.

To configure VLAN routing:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
M4100 Series Managed Switch
Routing
225