NETGEAR M4100 Series User Manual page 390

operation log. The system operation log stores the last N messages received during system
operation.

To configure persistent logs:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select Monitoring
8. To enable or disable logging, select the Admin Mode Enable or Disable radio button.
A log that is disabled does not log messages.
9. In the Behavior menu, select a log severity level.
A log records messages equal to or above a configured severity threshold. These
severity levels are available:
severity levels are available:
• Emergency (0). The system is unusable
• Alert (1). Action must be taken immediately
• Critical (2). Critical conditions
• Error (3). Error conditions
• Warning (4). Warning conditions
M4100 Series Managed Switch

Logs > Persistent Logs.
Monitoring the System
390