Electrolux TE1120 User Manual page 5

Tumble dryer
Hide thumbs Also See for TE1120:
Table of Contents

Advertisement

The appliance must be correctly earthed. The
manufacturer is not responsible for the consequences
of an inadequate earthing system.
Make sure that the electrical information on the rating
plate agrees with the power supply. If not, contact an
electrician.
Always use a correctly installed shockproof socket.
Do not use multi-plug adapters and extension cables.
Do not pull the mains cable to disconnect the appliance.
Always pull the mains plug.
Do not touch the mains cable or the mains plug with
wet hands.
If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
Only for UK and Ireland. The appliance has a 13 amp
mains plug. If it is necessary to change the fuse in the
mains plug, use a 13 amp ASTA (BS 1362) fuse.
This appliance complies with the E.E.C. Directives.
1.4 Use
WARNING!
Risk of injury, electrical shock, fire, burns or
damage to the appliance.
Obey the maximum load volume of 8kg (refer to the
"Programme chart" chapter).
Do not use the appliance if industrial chemicals have
been used for cleaning.
Wipe away lint that has accumulated around the
appliance.
Do not run the appliance without a filter. Clean the lint
filter before or after each use.
Do not dry unwashed items in the tumble dryer.
Items that have been soiled with substances such as
cooking oil, acetone, alcohol, petrol, kerosene, spot
removers, turpentine, waxes and wax removers should
ENGLISH
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents