Table of Contents
Advertisement
Volume Measurement
‣ Press the menu button five times to enter volume measurement
mode. A cube will appear on the display screen with one
edge flashing.
‣ Press the power on / read button to take the first measurement
(length).
‣ Press the power on / read button to take the second
measurement (width).
‣ Press the power on / read button to take the third measurement
(height).
‣ The volume will be calculated automatically with results shown
on the display screen.
‣ Press the clear / back / power off button to clear data. Press
and hold the clear / back / power off button to exit volume mode.
Single Pythagorean measurement
The single pythagorean mode calculates indirect measurements
when an obstacle prevents direct measurement. To achieve
accurate results the distances must be at a right angle.
‣ Press the menu button six times to enter single pythagorean
measurement mode. A triangle will appear on the display screen
with one edge flashing.
‣ Press the power on / read button to take the first measurement
from point A (A-B).
‣ Press the power on / read button to take the second
measurement (A-C). This measurement must be taken from the
same point as A-B.
‣ The distance will be calculated automatically (B-C) with results
shown on the display screen.
‣ Press the clear / back / power off button to clear data. Press
and hold the clear / back / power off button to exit single
pythagorean mode.
B
C
A
Advertisement
Table of Contents
