Table of Contents
Advertisement
TROUBLE SHOOTING
ERR01 Reflection
Measure towards an area without reflection interference or
remove the reflecting surface.
ERR02 Out of range
Measurements must be taken within 0.5 - 30m.
ERR03 The target provides poor reflection of the laser beam.
Change the target or cover with a piece of white paper.
ERR06 Low battery
Replace the batteries.
CARE AND MAINTENANCE
‣ Inaccurate measurement results may occur in harsh environments
such as strong sunlight, excessive temperature fluctuations, weak
reflective surfaces or low battery.
‣ Whenever possible, store the instrument in a cool, dry place.
Do not store in high temperatures or strong humidity for long
periods of time.
‣ Remove the batteries before storing the device for long periods
of time without use.
‣ To remove dust clean the instrument with a damp, soft cloth.
WARRANTY
The General LM30 comes with a 3 year manufacturers warranty.
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Separate to the above Australia Consumer Law, Spot-on
offers a global warranty.
Customer Support
To assist you with any queries or technical questions
please contact the customer support line: 1300 658 338
SPECIFICATIONS
Specifications
Product code
Warranty
Accuracy
Range
Laser class
LM30
70022
3 Years
±2mm
0.5 - 30m
2 Red
Advertisement
Table of Contents
