Preparation For Duct Connection - AEG Perfekt Glide-24 Instruction Manual

Fasten the wood strips with wood screws about 3" in
from each end.
NOTE:
slightly more than the recessed dimension. The
2. Measure and mark the electrical wiring opening in
also mark and measure the duct opening in the wall
or cabinet.
Prepara on for Duct Connec on
When you choose the Ducting mode, screwdriver wind board
fixed hood, ensure the PVC cover fixed on recirculation holes,
Keep the small handle rail installed on hood
Before installing the range hood, please rst x the outlet on
When you choose recirculation mode, keep the PVC cover
removed from hood get recirculation holes out. Keep the
bigger handle rail installed on hood.
9 | P a g e