Advertisement
Quick Links
Advertisement
Related Manuals for AEG PERFEKT GLIDE 24-1
Summary of Contents for AEG PERFEKT GLIDE 24-1
- Page 1 PERFEKT GLIDE 24-1 24” Built-in Telescopic Range Hood...
- Page 2 • • 115 Volt, 60Hz, 15AMP Quiet (7 sones/56dB) 300 CFM motor • AEG Range Hoods are supplied with a Canadian cord and plug • Electrical cord located 3 ” (79mm) from the top right corner of the unit at...
-
Page 3: Range Hood Dimensions
Specifications PERFEKT GLIDE 24-1 RANGE HOOD DIMENSIONS 9/16 D: 11” x W: 23 ” D: 280mm x W: 598mm FRONT PANEL - DUCTED Specifications are subject to change without notice V1.4... -
Page 4: Specifications
Specifications PERFEKT GLIDE 24-1 CABINET BOX DESIGN ” 600mm Shelf Supports Range hood 9/16 ” 166mm ” 210mm FRONT VIEW SIDE VIEW Specifications are subject to change without notice V1.4... -
Page 5: Front Panel Installation
Specifications PERFEKT GLIDE 24-1 FRONT PANEL INSTALLATION 9/16 ” 166mm NOTE: Removing the front stainless steel trim • 1. Pull the glide forward • 2. Remove the 4 screws holding the glide to the panel • 3. Install the matching front panel using the 4 screws... - Page 6 Specifications PERFEKT GLIDE 24-1 NOTE: Cabinet Door Panel Height • Ensure that the cabinet door panel is lengthened to accommodate the smaller sized Range Hood Front Panel Specifications are subject to change without notice V1.4...
-
Page 7: Damper Installation
Specifications PERFEKT GLIDE 24-1 DAMPER INSTALLATION 120mm 191.5mm ” 9/16 ” 139.7mm 168.5mm ” ” 201.5mm 100mm 15/16 15/16 ” ” SECURING THE DAMPER • Drill (1/8”) at the points located • Secure the damper to the motor housing using the screws supplied... - Page 8 Specifications PERFEKT GLIDE 24-1 DAMPER INSTALLATION (SHELF CUT-OUT) • Shelf with less than 1” of shelf extension MUST HAVE a support brace in place 175mm ” 141mm 220mm 11/16 9/16 ” ” 100mm 15/16 ” DAMPER CUT-OUT • W: 220mm x D:175mm...
- Page 9 Specifications PERFEKT GLIDE 24-1 DAMPER INSTALLATION (SHELF CUT-OUT) • Shelf with 1” or more extension does not require a support brace. 175mm ” 141mm 220mm 11/16 9/16 ” ” 100mm 15/16 ” DAMPER CUT-OUT • W: 220mm x D:175mm 11/16 W: 8 ”...
- Page 10 Specifications PERFEKT GLIDE 24-1 RECOMMENDED CABINET MINIMUM CLEARANCE (GAS COOKING SURFACE) Specifications are subject to change without notice V1.4...
- Page 11 Specifications PERFEKT GLIDE 24-1 RECOMMENDED CABINET MINIMUM CLEARANCE (ELECTRIC / INDUCTION COOKING SURFACE) 24” (610mm) Specifications are subject to change without notice V1.4...
- Page 12 AEG Appliances are designed and manufactured to the highest standards. Each appliance is covered by a comprehensive 2-year parts and labour warranty. Refer to product warranty policy for complete terms and conditions. FOR PARTS AND SERVICE Euro-Parts & Service 39822 Belgrave Road, Belgrave, ON. N0G 1E0 1 800 678 8352 (Canada) •...