Preparation For Duct Connection - AEG Perfekt Glide-24 Instruction Manual

Fasten the wood strips with wood screws about 3" in
from each end.
NOTE: the thickness of the wood strips should be
slightly more than the recessed dimension. The
length should be cut to size.
2. Measure and mark the electrical wiring opening in
the wall or the cabinet. If the hood is to be vented,
also mark and measure the duct opening in the wall
or cabinet.

Preparation for Duct Connection

Remove the appropriate ducting knockout by inserting a
screwdriver under one end and prying it up. Then snip or
break the attachment points.
Before installing the range hood, please first fix the outlet on
the air duct hole of the hood.
9 | P a g e