Front Seats - Jeep 2001 Liberty User Manual

• Once you have completed securing the child restraint with the seat belt, secure
the top tether strap. The tether strap should be attached to the tether anchor
on the rear of the seatback using the most direct path. For the outboard
seating positions, route the tether underneath the head rest and attach the
hook to the tether anchor located on the back of the seat.
• In a collision, an unrestrained child, even a tiny baby, can become a projectile
inside the vehicle. The force required to hold even an infant on your lap could
become so great that you could not hold the child, no matter how strong you
are. The child and others could be severely injured or killed. Any child riding in
your vehicle should be in a proper restraint for the child's size.
• Improper installation of a child restraint to the LATCH anchorages can lead to
failure of an infant or child restraint. The child could be severely injured or killed.
Follow the manufacturer's directions exactly when installing an infant or child
restraint.
• An incorrectly anchored tether strap could lead to increased head motion and
possible injury to the child. Use only the anchor positions directly behind the
child seat to secure a child restraint top tether strap.
• Rearward-facing child seats must never be used in the front seat of a vehicle
with a front passenger airbag. An airbag deployment could cause severe injury
or death to infants in this position.

FRONT SEATS

Power Seats
GETTING STARTED
WARNING!
• The power seat switch, located on
the outboard side of the seat near
the floor, controls forward/back,
up/down, and tilt adjustment.
Recliner
• Lean forward slightly, lift the recliner
lever located on the outboard side of
the seat, lean back and release at the
desired position.
13