Basic Tab; Layout Tab - Konica Minolta magicolor 5450 User Manual

Basic Tab

The Basic Tab allows you to
#
Specify the orientation of the media
#
Specify the size of the original document
#
Select the output media size
#
Zoom (expand/reduce) documents
#
Specify the paper source
#
Specify the type of media
#
Specify the number of copies
#
Turn on/off job collation
#
Save a print job on the printer and print it later (Job Retention)
#
Save a confidential job on the printer and protect it with a password
#
Print a single copy for proofing
#
Send a notification by e-mail when printing is finished
#
Specify user information such as e-mail addresses and passwords
#
Print on the back side of paper that has already been printed on
! "
Use paper that has been printed on with magicolor 5450.
In addition, the page printed with this setting is not guaranteed.
! "
Do not use the following types of paper.
- Paper that has been printed on with an inkjet printer
- Paper that has been printed on with a monochrome/color lase
printer/copier
- Paper that has been printed on with any other printer or fax machine

Layout Tab

The Layout Tab allows you to
#
Print several pages of a document on the same page (N-up printing)
#
Specify booklet printing
#
Rotate the print image 180 degrees
#
Specify duplex printing
#
Specify whether or not blank pages are printed (PCL printer driver only)
#
Adjust the binding margin (PCL printer driver only)
#
Adjust the printing position (PCL printer driver only)
Using the Postscript and PCL Printer Driver
17