Class1 Division 1; List Of Notes - extronics iCAM501U Operating Manual

1.2.2 Class1 Division 1

1.2.2.1 iCAM502 (units dated before 18
iCAM502 units with date codes before 18
1.2.2.2 iCAM501U (all date codes) and iCAM502 (units dated after 18
(Taken from FM approvals certificate 3042108 amended July 12
Special conditions for use;
1. Must be used with Battery specified in the Operations Manual 331684
2. Temperature code is T4, T1=-20
batteries, or T3C, Ta=-20
batteries.

1.3 List of Notes

The notes supplied in this chapter provide information on the following.
•
Danger! / Warning!
o Possible hazard to life or health.
•
Caution
o Possible damage to property.
•
Important
o Possible damage to enclosure, device or associated equipment.
•
Information
o Notes on the optimum use of the device
1.3.1.1 Notes common to all iCAM501U and iCAM502 Units
Warning! Any connection to the iCAM50x USB port must NOT be made in a
hazardous area.
Warning! The user shall NOT mix different cells in ANY application
Warning! For ATEX/IECEx GROUP I applications ONLY, the changing of the cells
in the hazardous area or the transportation of spare cells into the
hazardous area is NOT PERMITTED.
Warning! For ATEX/IECEx GROUP II and Class 1 Division 1 applications ONLY, the
user shall not carry more than a maximum of 2 spare approved cells into
the hazardous area. Precautions shall be taken to prevent short
circuiting of un-protected cell terminals. Discharged cells shall be
removed from the hazardous area.
Warning! Warning!
ambient temperature range of the equipment is from -20
Operating Manual
th
July 2013)
th
July 2013 are not Class 1 Division 1 approved.
o o
C to 55 C with Duracell Plus or Procell MN1500
o o
C to 50 C with Duracell Procell PC1500 or Energizer E91
For ATEX/IECEx GROUP II applications ONLY the rated
5
th
July 2013)
th
2013)
o
C to 60
o
C.