Changing/Installing Batteries - extronics iCAM501U Operating Manual

2.2 Changing/Installing Batteries

Warning! For iCAM501U refer to notes in section Error! Reference source not found.,
and refer to Error! Reference source not found. for permitted cells.
Warning! For iCAM502 refer to notes in section Error! Reference source not found.,
and refer to Error! Reference source not found. for permitted cells.
To change or install the batteries in the iCAM50x, turn the screw as indicated below to
remove the cover:
Install the batteries in the correct orientation (indicated on the enclosure) and close the lid
again:
USB Port
Operating Manual
Battery
Compartment
10