Dymo LabelManager Quick Start Manual page 8

Starting the Built-In Software
The built-in software resides on the label maker; no installation is required.
To start the software for Windows
If necessary, press the power button to turn on the label maker.
1
Depending on Windows AutoRun settings, the software may
start automatically.
If the software does not start automatically, do one of the following:
2
• If the AutoRun or AutoPlay dialog box appears, follow the on-screen
instructions to start the
• If the AutoRun dialog box does not appear, navigate to
My Computer DYMO PnP, and then click
To start the software for Mac OS
If necessary, press the power button to turn on the label maker.
1
The DYMO PnP volume appears on your desktop.
Double-click DYMO PnP to open the volume.
2
Double-click
3
Disconnecting the Label Maker from Your Computer
To disconnect the label maker from your computer
(Mac Only) Drag the DYMO PnP volume to the trash.
1
Press the power button to turn off the label maker.
2
Unplug the USB cable from your computer.
3
4
®
DYMO Label Light software.
®
to start the software.
DYMO Label Light.exe.