Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Dymo Costar 400
Summary of Contents for Dymo Costar 400
- Page 1 Quick Start Guide...
- Page 2 © 2007 Sanford, L.P. All rights reserved. DYMO and LabelWriter are registered trademarks of Sanford, L.P. All other trademarks are the property of their respective holders.
-
Page 3: Quick Start Guide
Follow these steps to install the LabelWriter printer and print your first label. 1. Unpacking your LabelWriter Printer Do not plug the printer into your computer until asked to do so during the NOTE software installation. Unpack your printer and save the packing materials. - Page 4 LabelWriter Printer Features Your LabelWriter printer is a direct thermal printer and does not use ink or toner. Instead, the printer uses heat from a thermal print head to print on specially treated labels. Labels are the only supplies you will ever need to buy.
-
Page 5: Installing The Software
See Figure 3. Double-click the Installer icon and follow the instructions. If you do not see your printer in the printer list when the installation is complete, refer to the ReadMe file for instructions on how to add the printer. - Page 6 Plug the power cord into the power adapter. See Figure 4. Plug the power adapter into the power connector on the bottom of the printer. See Figure 5. Plug the other end of the power cord into a power outlet.
-
Page 7: Loading Labels
NOTE label spool, with no gaps, to avoid drifting as the labels feed through the printer. Insert the label spool into the slot in the printer cover with the labels extending from underneath the roll. See Figure 9. Spool Spool... -
Page 8: Printing Your First Label
Close the top cover. You are now ready to print your first label. 5. Printing your First Label To print your first label Start DYMO Label Software by doing one of the following: • For Windows, click Start, then Programs>DYMO Label>DYMO Label. •... - Page 9 Address Book; automatically insert them on your label. For complete details on using the software, refer to the DYMO Label Software User Guide, located on the DYMO Label Software CD-ROM, and the online Help. Insert text you’ve Verify and correct addresses...
- Page 10 To install DYMO Stamps and print postage Sign up for your USPS account with Endicia. Go to: www.endicia.com/dymostamps At the end of the sign up process, download and install the DYMO Stamps software. DYMO Stamps software is available for both Windows and Mac OS X.
- Page 11 You are now ready to start printing actual postage whenever you need it. Refer to the DYMO Stamps online Help for more information about using the software. You can add postage, buy DYMO Stamps postage labels, and order supplies directly from within the DYMO Stamps software.
-
Page 14: Ordering Labels
You can purchase labels from your local computer and office supply retailer or directly from DYMO. Visit www.dymo.com or call 1.800.426.7827. DYMO Stamps labels are regulated by the United States Postal Service, and must be purchased through the link in DYMO Stamps software or through your Endicia postage account.